Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About
It is currently Sun May 01, 2016 4:03 am
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed
- Tapatalk connection is currently broken

Those bugs will be fixed ASAP (next few days) as they are unfortunately more serious than expected.

If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062

All times are UTC+01:00

Post new topic  Reply to topic  [ 20 posts ]  Go to page Previous 1 2
Author Message
PostPosted: Thu Jan 23, 2014 7:16 pm 

Joined: Sun May 16, 2010 7:28 pm
Posts: 800
Red 2013 shifters lack the trim click for the FD, because it is unnecessary with newer yaw models. Thus old shifters are forward compatible with yaw derailleurs but newer shifters are not backwards compatible with non-yaw derailleurs.

PostPosted: Thu Jan 23, 2014 7:26 pm 

Joined: Thu Nov 29, 2012 12:36 pm
Posts: 240
Location: The Netherlands
OK, Thanks. I justed pulled the trigger on a full Sram Red group, elaminating the entire problem :mrgreen:

PostPosted: Fri May 30, 2014 7:48 pm 

Joined: Sun Aug 02, 2009 6:59 pm
Posts: 194
Has anyone tried using the 2013 10sp Red shifters with a XX rear derailleur and 10sp 11-36 sram or shimano cassette?

Velonews reported that 2013 10sp Red shifters worked perfect with the older Red rear derailleur. I also know that older 10sp Red shifters worked well shifting the XX rear derailleur over a 10sp Sram 11-36 cassette (e.g., David Millar's 2011 Giro S3).

Therefore, it would make sense for the combination I'm asking about to work....but I'm having trouble finding real world examples.

I ask b/c I'm taking a cycling vacation to Switzerland and Italy in August, and as much as I love my Campagnolo, I'm worried that 34x29 won't be low enough on roads like Grosse Scheidegg and Mortirolo for my fat ass.


PostPosted: Sun Dec 14, 2014 5:04 am 

Joined: Fri Feb 01, 2013 6:19 pm
Posts: 84
Location: Portland, Oregon
am considering running a full 11 speed sram 22 group (prolly new rival or force) but plan to run it 10 speed with a 10 speed cassette. Any idea if that will work?

PostPosted: Sun Dec 14, 2014 7:21 am 

Joined: Tue May 31, 2011 9:48 pm
Posts: 243
11 speed and 10 speed cassette spacing is different. The 11 speed and 10 speed shift levers have different cable pull to accommodate the different cassette spacing.

An 11 speed right shift lever is not compatible with a 10 speed cassette. Best you could do is (like someone mentioned above) take one of the cogs off the 11 speed cassette, leaving 10 cogs with the same spacing as the 11 speed cassette.

Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 20 posts ]  Go to page Previous 1 2

All times are UTC+01:00

Who is online

Users browsing this forum: ms6073, numbers505 and 20 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited