Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About
It is currently Thu May 05, 2016 3:45 pm
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED

If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062


All times are UTC+01:00





Post new topic  Reply to topic  [ 8 posts ] 
Author Message
 Post subject: fit questions
PostPosted: Sat Jan 12, 2013 7:25 pm 
Offline

Joined: Sat Jan 12, 2013 6:09 pm
Posts: 2
I recently sold my '12 Cervelo R3 and bought a Cannondale CAAD 10.
I was professionally fitted on the R3 but won't have the luxury of the same on the CAAD.
The CAAD has a longer "reach" measurement but a shorter effective top tube measurement, only by .5mm though.
This would mean I need to move my saddle back by a hair to achieve the same "setback" measurement as the R3.
My question is,
Will I need a longer stem as well?
Forgot to add...the reach on the C3 Cannondale bars is also shorter than the
R3's 3T Ergonova bars.
Thanks in advance for any help.


Top
   
 Post subject: Re: fit questions
PostPosted: Sat Jan 12, 2013 8:18 pm 
Offline

Joined: Sat May 12, 2012 5:48 am
Posts: 105
First off size of the r3 and caad and also the stem length u had


Top
   
 Post subject: Re: fit questions
PostPosted: Sat Jan 12, 2013 11:29 pm 
Offline

Joined: Sat Jan 12, 2013 6:09 pm
Posts: 2
Both 54...100mm stem on Cervelo ....stock on CAAD is 100mm.


Top
   
 Post subject: Re: fit questions
PostPosted: Sun Jan 13, 2013 12:44 am 
Offline

Joined: Tue Oct 23, 2012 5:02 pm
Posts: 63
The reach on the Caad is 5 mm more than on the R3. But the Caad has 9 mm less stack than the R3 so assuming you want the same bar height (relative to bb) the effective reach on the caad will be less than 5 mm bigger than the reach on the R3.

As for saddle setback, effective top tube length is a red herring (since it's dependent in stack). You should consider difference in sta. The change in saddle setback going from one sta to another is dependent on saddle height, but as there's only 0.5 degree difference between the two it will be less than 1 cm difference between the two ( (cos(73)-cos(73.5))*seat height).


Top
   
 Post subject: Re: fit questions
PostPosted: Sun Jan 13, 2013 3:14 am 
Offline
User avatar

Joined: Thu Aug 25, 2005 7:09 pm
Posts: 1235
Location: In the industry
Yes you need to move the seat back 7mm-ish to achieve the same relative position. Since your bar has less reach, you probably won't need a different stem, because assuming the different in bar reach is close to 5mm, you could end up with an identical HOOD POSITION.

What I would do, an I'd highly recommend to everyone else, is keep stems in a few sizes (grab cheap house brand stems from Scott, Felt, Cdale, etc for $10 on ebay). The time it takes to swap them is roughly the same as asking on a forum. Go for a ride and see which one works best. You could even keep two stems in your jersey pocket and change them on the fly.

_________________
Fast falcons: http://www.youtube.com/watch?v=j3mTPEuFcWk" onclick="window.open(this.href);return false;
www.falcobike.com
Facebook: falcobikeglobal


Top
   
 Post subject: Re: fit questions
PostPosted: Sun Jan 13, 2013 4:28 am 
Offline
in the industry
User avatar

Joined: Sun Jul 29, 2012 2:59 pm
Posts: 824
Location: Ruidoso, NM
MagnusH wrote:
...assuming you want the same bar height (relative to bb) the effective reach on the caad will be less than 5 mm bigger than the reach on the R3.


If only the "reach" was measured at some arbitrary height (same for all frames)... then you'd be able to compare directly.

The 9mm shorter stack of the Caad shaves off over half of the 5mm reach increase.

_________________
formerly rruff...


Top
   
 Post subject: Re: fit questions
PostPosted: Sun Jan 13, 2013 9:23 am 
Online

Joined: Fri Jun 05, 2009 9:40 am
Posts: 535
Location: Switzerland
firstcaad wrote:
I recently sold my '12 Cervelo R3 and bought a Cannondale CAAD 10.
I was professionally fitted on the R3 but won't have the luxury of the same on the CAAD.
The CAAD has a longer "reach" measurement but a shorter effective top tube measurement, only by .5mm though.
This would mean I need to move my saddle back by a hair to achieve the same "setback" measurement as the R3.
My question is,
Will I need a longer stem as well?
Forgot to add...the reach on the C3 Cannondale bars is also shorter than the
R3's 3T Ergonova bars.
Thanks in advance for any help.


'move saddle back...' no, assuming you want to replicate your postition 1:1, your saddle stays in the same position in relation to the bottom bracket

did you record the measurements on your R3 ?

then re the handlebar, what headset bearing cover (and spacers) did you use on the cervelo, which headset bearing cover will you use on the CAAD10 ?

do you want to replicate handlebar drop 1:1 ?


Top
   
 Post subject: Re: fit questions
PostPosted: Sun Jan 13, 2013 3:40 pm 
Offline

Joined: Fri Mar 24, 2006 1:26 pm
Posts: 2529
Reach values can only be compared directly, if the stack heights are the same. If not, then subtract 3mm for each 10mm of stack height difference, from the reach of the shorter frame for a more accurate comparison.

The saddle nose should be positioned at the same position as it was on the old frame (relative to the BB centerline). Any difference in reach is usually handled with a different length stem.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 8 posts ] 

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. DA Groupset questions.

in Road

Wonderman

9

969

Thu Jul 30, 2015 7:15 pm

Wonderman View the latest post

There are no new unread posts for this topic. New project - some questions ....

in Road

Kupepe

4

570

Sat Jan 30, 2016 6:30 am

Kupepe View the latest post

There are no new unread posts for this topic. Questions on Lake shoes

in Road

DeLuz

10

604

Wed Mar 16, 2016 9:02 pm

DeLuz View the latest post

There are no new unread posts for this topic. If you owned a Dura Ace C50, I have 2 questions

in Road

novetan

0

333

Thu Oct 01, 2015 12:42 pm

novetan View the latest post

There are no new unread posts for this topic. New to road tubeless with questions

[ Go to page: 1 2 ]

in Road

upside

17

1000

Thu Dec 10, 2015 3:32 pm

Krackor View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: Bing [Bot], etownfwd, Exabot [Bot], gmakris, Ltoddokc, phourgenres and 37 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited