HOT: Active* forum members generally gain 5% discount at starbike.com store!
Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Articles FAQ Contact About




Post new topic This topic is locked, you cannot edit posts or make further replies.  [ 4 posts ] 
Author Message
PostPosted: Fri Mar 29, 2013 9:43 pm 
Offline

Joined: Fri Jun 03, 2011 6:30 pm
Posts: 49
Getting ready to put these on. I have si sl armes and a new spider ring. Which parts of the spindle should be greased? Any guidelines on the number of shims to me used on a super six evo?

Many, many, many threads on this.


Top
 Profile  
 
PostPosted: Sat Mar 30, 2013 1:17 am 
Offline
User avatar

Joined: Mon May 25, 2009 9:34 am
Posts: 406
Location: Melb, Australia
SiSl2 Install Guide

In regards to the number of shims, install the cranks using just the standard DS and NDS spacers and wave washer. Torque to 40nm and see how many shims you can fit in the space between the NDS spacer and the bearing shield to fully compress the wave washer. This is the number of shims you'll need.

On my bike, I use one 1mm shim.

_________________
CAAD10 Di2


Top
 Profile  
 
Posted: Sat Mar 30, 2013 1:17 am 


Top
  
 
PostPosted: Sat Mar 30, 2013 12:31 pm 
Offline

Joined: Sat Feb 07, 2009 5:52 am
Posts: 250
I would grease the following:
crank/spidering interface
Lockring
spindle flutes
crank bolt threads and underside of head (including steel washers)

AS above, you'll need to install in order gauge # of shims required.


Top
 Profile  
 
PostPosted: Sat Mar 30, 2013 11:55 pm 
Offline
Shop Owner

Joined: Sat Jun 13, 2009 4:02 am
Posts: 1969
Location: NoVA/DC
If you want to do it how it's supposed to be done, do not grease the spidering or the lockring. Cannondale specs Loctite 242 for both places, although I consider the spline interface a retaining ring type of fitment and go with 603/609. You should grease all other contact points, bolt threads and bolt head face, spindle spline, etc.
Tcurtbike's method of determining the ideal number of washers is the best way. Just make sure that the crank is fully bottoming out every time.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic This topic is locked, you cannot edit posts or make further replies.  [ 4 posts ] 


Who is online

Users browsing this forum: Exabot [Bot], GreenGoat93, grover, mnmasotto, rbrtwyn, refthimos, WheresWaldo, Yahoo [Bot] and 33 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. CANNONDALE SPIDERING - INSTALL/SETUP

in Road

G6612

14

724

Wed Aug 13, 2014 3:43 am

ProEvoSLTeamHighMod View the latest post

There are no new unread posts for this topic. How to install a BB30 crank on OSBB - cowboy style!

in Road

Elrey

0

630

Sat Dec 28, 2013 7:38 pm

Elrey View the latest post

There are no new unread posts for this topic. (im)Possible to install a Campy SRM on a 386 Evo BB ?

in Road

vlastrada

2

510

Sun Oct 27, 2013 3:46 am

vlastrada View the latest post

There are no new unread posts for this topic. At home Di2 install....

[ Go to page: 1, 2, 3 ]

in Road

chiltonp

35

2508

Thu Aug 21, 2014 6:24 pm

rma View the latest post

There are no new unread posts for this topic. Campy EPS V2 Install on Cervelo S2

in Road

elstinnett

10

878

Tue Aug 05, 2014 10:47 pm

Bph4bama View the latest post


It is currently Wed Oct 22, 2014 11:49 pm

All times are UTC + 1 hour




Advertising   –  FAQ   –  Contact   –  Convert   –  About

© Weight Weenies 2000-2013
hosted by starbike.com


How to get rid of these ads? Just register!


Powered by phpBB