Hongfu FM-066/Chinese open mould frame thread
Moderator: robbosmans
- prendrefeu
- Posts: 8580
- Joined: Wed Oct 31, 2007 10:32 pm
- Location: Glendale / Los Angeles, California
- Contact:
And who told you that?
Exp001 || Other projects in the works.
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
What do you guys think about this aero CR01 from Miracle? https://miracle-bikes.en.alibaba.com/pr ... Frame.html
The weight seems OK, but I’m not too sure with what to compare to.
I’ve been looking for an aero bike to run with di2; think I’ve decided to go rim brakes. I like the full internal cables but I’m a bit worried it might mess up the rear brake, but then again it’s mounted under the B.B. so less sharp turns. The geo seems pretty similar to other aero frames but not as low as Canyon’S aeroad.
Any comments? Any experience with Miracle? I’ve bought from China before but never from them.
I also looked the 095 from Workswell but found some negative reviews here in this thread. If you’ve got any other suggestions please do enlighten me.
Sent from my iPad using Tapatalk
The weight seems OK, but I’m not too sure with what to compare to.
I’ve been looking for an aero bike to run with di2; think I’ve decided to go rim brakes. I like the full internal cables but I’m a bit worried it might mess up the rear brake, but then again it’s mounted under the B.B. so less sharp turns. The geo seems pretty similar to other aero frames but not as low as Canyon’S aeroad.
Any comments? Any experience with Miracle? I’ve bought from China before but never from them.
I also looked the 095 from Workswell but found some negative reviews here in this thread. If you’ve got any other suggestions please do enlighten me.
Sent from my iPad using Tapatalk
Didn't even think about the tangent screw being on the wrong side, not that it matters with Di2, but it does tell you something about how well thought through the frame design.
Whats wrong with 1-1/2 to 1-1/2 headset? Never had that before, but is there an issue to it? This Workswell has the same http://www.workswellbikes.com/PRODDUCT/ ... 17/13.html
Any other suggestions?
Perhaps I'll skip the internal cables through the handlebar and go with Workswell WCB-R-081 or 145.
http://www.workswellbikes.com/PRODDUCT/ ... 6/127.html
http://www.workswellbikes.com/PRODDUCT/ ... 5/137.html
Whats wrong with 1-1/2 to 1-1/2 headset? Never had that before, but is there an issue to it? This Workswell has the same http://www.workswellbikes.com/PRODDUCT/ ... 17/13.html
Any other suggestions?
Perhaps I'll skip the internal cables through the handlebar and go with Workswell WCB-R-081 or 145.
http://www.workswellbikes.com/PRODDUCT/ ... 6/127.html
http://www.workswellbikes.com/PRODDUCT/ ... 5/137.html
Got everything ready to go except for the frame
I ordered and paid roughly 1 month ago so maybe ill get lucky and itll come before the new year (probably not though)
Its full of dodgy aliexpress parts that I know some people will love
I plan to replace the bars once I get my fit sorted
A friend got one of the xcadey power meters and they are actually pretty good (numbers are line with my hammer and 4iiii power meter)
I'm only racing on my mtb so roady is mostly used on the trainer.
I ordered and paid roughly 1 month ago so maybe ill get lucky and itll come before the new year (probably not though)
Its full of dodgy aliexpress parts that I know some people will love
I plan to replace the bars once I get my fit sorted
A friend got one of the xcadey power meters and they are actually pretty good (numbers are line with my hammer and 4iiii power meter)
I'm only racing on my mtb so roady is mostly used on the trainer.
Weights still missing:d36 wrote:Got everything ready to go except for the frame
I ordered and paid roughly 1 month ago so maybe ill get lucky and itll come before the new year (probably not though)
Its full of dodgy aliexpress parts that I know some people will love
I plan to replace the bars once I get my fit sorted
A friend got one of the xcadey power meters and they are actually pretty good (numbers are line with my hammer and 4iiii power meter)
I'm only racing on my mtb so roady is mostly used on the trainer.
-headset
-expander
-rim tape
-bar tape
-through axles
Have the same frame at home. Waiting for the right brakes to build it. Can you let me know how close the front disc is to your fork with the Novatec hubs? Mine is awfully close...
Will doTiclimax wrote:Weights still missing:d36 wrote:Got everything ready to go except for the frame
I ordered and paid roughly 1 month ago so maybe ill get lucky and itll come before the new year (probably not though)
Its full of dodgy aliexpress parts that I know some people will love
I plan to replace the bars once I get my fit sorted
A friend got one of the xcadey power meters and they are actually pretty good (numbers are line with my hammer and 4iiii power meter)
I'm only racing on my mtb so roady is mostly used on the trainer.
-headset
-expander
-rim tape
-bar tape
-through axles
Have the same frame at home. Waiting for the right brakes to build it. Can you let me know how close the front disc is to your fork with the Novatec hubs? Mine is awfully close...
How long of a wait did you have for your frame?
A pretty long time, but that's because they had some doubts whether a 28mm tire would fit. In the end, I realised I'm not planning on riding a 28mm tire, so I told 'm to just send it. There was a lot of back and forth then. When it was finally shipped it only took two weeks to get to me in Europe (XDB shipping). On a positive note: weights were close to the estimate (906g for a 54 and 319 for the fork).d36 wrote:Will doTiclimax wrote:Weights still missing:d36 wrote:Got everything ready to go except for the frame
I ordered and paid roughly 1 month ago so maybe ill get lucky and itll come before the new year (probably not though)
Its full of dodgy aliexpress parts that I know some people will love
I plan to replace the bars once I get my fit sorted
A friend got one of the xcadey power meters and they are actually pretty good (numbers are line with my hammer and 4iiii power meter)
I'm only racing on my mtb so roady is mostly used on the trainer.
-headset
-expander
-rim tape
-bar tape
-through axles
Have the same frame at home. Waiting for the right brakes to build it. Can you let me know how close the front disc is to your fork with the Novatec hubs? Mine is awfully close...
How long of a wait did you have for your frame?
Hi,
Does anybody has experience with Carbonda?
I am seeking a TT frame with fully integrated cable routing (from the bars) with hidden brakes preferably disc brakes. This what I found only: http://carbonda.com/road/tt/tr/75.html
Any other proposal or advise is highly appreciated!
Thanks
Does anybody has experience with Carbonda?
I am seeking a TT frame with fully integrated cable routing (from the bars) with hidden brakes preferably disc brakes. This what I found only: http://carbonda.com/road/tt/tr/75.html
Any other proposal or advise is highly appreciated!
Thanks
Gorgeous looking frame!
Tarmac SL6 & Campag Record EPS https://weightweenies.starbike.com/foru ... 0&t=153968
"Sometimes you don't need a plan. You just need big balls." Tom Boonen
"Sometimes you don't need a plan. You just need big balls." Tom Boonen
There is so much great information on this thread, so first of all thank you to all of you who have spend copious amounts of time posting!
So far it seems that the new 066 Evo / FM008 is the go to for a lite road frame. But what about an aero frame?
回复 from Tantan/LT/Seraph suggested the TT-X11 which apparently is better than the FM268. Has anyone tried this? Alternatively can anybody recognise if it's a "copy" of an existing frame?
It weighs 1020g so not too heavy.
http://www.tantancycling.com/index.php? ... w&p_id=537
So far it seems that the new 066 Evo / FM008 is the go to for a lite road frame. But what about an aero frame?
回复 from Tantan/LT/Seraph suggested the TT-X11 which apparently is better than the FM268. Has anyone tried this? Alternatively can anybody recognise if it's a "copy" of an existing frame?
It weighs 1020g so not too heavy.
http://www.tantancycling.com/index.php? ... w&p_id=537
-
- Posts: 51
- Joined: Tue Jun 02, 2015 12:33 am
I know what you are saying and imho the FD is left and the RD is right, however I have seen many european bikes with the FD in the right side and then the cables cross inside of the frame. I wonder if it is to make the curvature of the cables less pronounce to shift better, I have not find any explanation why they do it.
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
I've cabled up bikes with a cross half way down the downtube. You get a higher radius at the head tube as you run the gear cables across the ht - and if you subscribe to continental braking (LH Front) you can bind all the cables together. The greater radius is especially noticeable with shitty cables. I haven't done it with current gen cables as they are pretty good.speedyvelo1 wrote: ↑Mon Dec 25, 2017 9:51 pmI know what you are saying and imho the FD is left and the RD is right, however I have seen many european bikes with the FD in the right side and then the cables cross inside of the frame. I wonder if it is to make the curvature of the cables less pronounce to shift better, I have not find any explanation why they do it.
The problem I have with that bike is the cabling is routed through the stem and the pictures don't look like they let it cross at the bar/stem, meaning you'd have to cross it further down - and it doesn't look like you gain any advantage from crossing further down at the head tube as you've already done a tight bend in the stem.
Chasse patate