Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About Impressum
It is currently Fri Dec 15, 2017 10:56 pm

All times are UTC+01:00





Post new topic  Reply to topic  [ 2950 posts ]  Go to page Previous 117 18 19 20 21197 Next
Author Message
 Post subject: Re: FM-066 SL frame
PostPosted: Mon Apr 01, 2013 8:47 pm 
Offline

Joined: Sat Aug 11, 2012 6:13 pm
Posts: 148
Okay. Maybe that's the way to go. It just seems a bit strange if they include a headset which don't fits perfect. That's actually pretty irritating.


Top
   
 Post subject: Re: FM-066 SL frame
PostPosted: Mon Apr 01, 2013 9:05 pm 
Offline

Joined: Tue Nov 11, 2003 9:47 pm
Posts: 2196
Location: Santa Cruz, California, USA
Make sure your crown race is seated the same amount all the way around the fork. Otherwise the bearing will be binding in one direction and loose in the other.


Top
   
 Post subject: Re: FM-066 SL frame
Posted: Mon Apr 01, 2013 9:05 pm 


Top
   
 
 Post subject: Re: FM-066 SL frame
PostPosted: Mon Apr 01, 2013 9:20 pm 
Offline

Joined: Sat Aug 11, 2012 6:13 pm
Posts: 148
Yes, will do.

It's pretty hard to disalign the lower bearing. It can nearly only happen if the frame is made wrong. I will get back when i have given it another try.


Top
   
 Post subject: Re: FM-066 SL frame
PostPosted: Thu Apr 04, 2013 7:30 pm 
Offline

Joined: Sat Aug 11, 2012 6:13 pm
Posts: 148
Hello again!

I have now taken the crown race off and taken a picture. The downside is not totally flat as you see. Also a picture of the fork crown is attached.

What do you guys say?


Image

Image


Top
   
 Post subject: Re: FM-066 SL frame
PostPosted: Thu Apr 04, 2013 8:18 pm 
Offline

Joined: Tue Nov 11, 2003 9:47 pm
Posts: 2196
Location: Santa Cruz, California, USA
That's what mine looked like. I have the Neco headset.

I used a piece of PVC pipe of the right diameter (it fit neatly on the flat part of the crown race) and greased the fork.
I have read warnings about putting force on the underside of the fork crown, so I grabbed the fork legs
with the fork upside down and whacked the fork and pipe against the floor.


Top
   
 Post subject: Re: FM-066 SL frame
PostPosted: Thu Apr 04, 2013 8:57 pm 
Offline

Joined: Sat Aug 11, 2012 6:13 pm
Posts: 148
Thx.
That's exactly what I did. I will try again. Maybe sand a bit?


Top
   
 Post subject: Re: FM-066 SL frame
PostPosted: Fri Apr 05, 2013 7:58 am 
Offline
User avatar

Joined: Wed Dec 15, 2010 10:32 am
Posts: 589
Location: Estonia
Don´t sand. Put a little liquid soap + PVC pipe method.

_________________
"Nothing compares to the simple pleasure of a bike ride"
Jamis Renegade Expert
Spark 900 RC


Top
   
 Post subject: Re: FM-066 SL frame
PostPosted: Fri Apr 05, 2013 10:18 am 
Offline

Joined: Sat Aug 11, 2012 6:13 pm
Posts: 148
Will do chief.


Top
   
 Post subject: Re: FM-066 SL frame
PostPosted: Sat Apr 06, 2013 1:20 pm 
Offline

Joined: Thu Mar 28, 2013 4:42 pm
Posts: 862
Location: Pa USA
Actually, it looks to me like he crown race was fully seated in the frst pic-here's mine-the gap may be just the was it is
Image


Top
   
 Post subject: Re: FM-066 SL frame
PostPosted: Sat Apr 06, 2013 4:23 pm 
Offline

Joined: Sat Aug 11, 2012 6:13 pm
Posts: 148
It looks like it's exactly the same.


Top
   
 Post subject: Re: FM-066 SL frame
PostPosted: Sun Apr 07, 2013 10:26 pm 
Offline
User avatar

Joined: Fri Jul 23, 2004 8:24 pm
Posts: 2224
Location: Houston, Texas
How about an image of the crown race with the bearing seated on top? My suspicion is that the bearing supplied is incorrect and does not have the correct inner/outer angles which does not allow it to fully seat against the inner race inside the headtube. Alternately, measure the stack height of the crown race and bearing and compare to the measurement inside the headtube, if the wrong bearing has been supplied, other than a lower profile headset bearing, no amount of tinkering is going to resolve it.

_________________
Michael - The Anaerobic Threshold is neither...


Top
   
 Post subject: Re: FM-066 SL frame
PostPosted: Thu Apr 11, 2013 1:51 pm 
Offline

Joined: Thu Mar 28, 2013 4:42 pm
Posts: 862
Location: Pa USA
Aside from appearance, its not a problem, I've ridden the bike hard for 2 weeks now, and it rides/handles spectacularly.


Top
   
 Post subject: Re: FM-066 SL frame
PostPosted: Thu Apr 11, 2013 2:00 pm 
Offline

Joined: Thu Mar 28, 2013 4:42 pm
Posts: 862
Location: Pa USA
If you're really concerned http://www.diymtb.com/displayItems.asp?cid=58 has the bearings in 8,7 and12(!)mm applications. If the stock bearing is 8, 7 will make it "look better" but I would want to be sure that the top of the crown doesn't rub on the lower headtube.


Top
   
 Post subject: Re: FM-066 SL frame
PostPosted: Thu Apr 11, 2013 2:10 pm 
Offline

Joined: Wed Jan 26, 2011 3:14 pm
Posts: 102
I have the same gap with my Chris King Nothreadset and Funda fork - the crown race is thick enough to create a gap, and the lower bearing cup doesn't extend low enough on the sides to cover it. But it's not wrong.


Top
   
 Post subject: Re: FM-066 SL frame
PostPosted: Thu Apr 11, 2013 9:54 pm 
Offline

Joined: Thu Mar 28, 2013 4:42 pm
Posts: 862
Location: Pa USA
anyone using a chain catcher with this frame? Which one?


Top
   
 Post subject: Re: FM-066 SL frame
Posted: Thu Apr 11, 2013 9:54 pm 


Top
   
 
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 2950 posts ]  Go to page Previous 117 18 19 20 21197 Next

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Guide me to the best open mould frame (super light and super stiff)

in Road

KOMwannabe

8

1412

Tue Nov 21, 2017 2:11 pm

KOMwannabe View the latest post

There are no new unread posts for this topic. Attachment(s) Weird Lightweight Chinese Steel Frame - CLR6200 Reynolds 520

[ Go to page: 1 2 ]

in Road

waltthizzney

15

2221

Sat Nov 18, 2017 12:43 pm

ernestkus View the latest post

There are no new unread posts for this topic. updated recommendations on open mold frame suppliers

[ Go to page: 1 2 ]

in Road

apctjb

15

1922

Sat Nov 18, 2017 9:22 pm

apctjb View the latest post

There are no new unread posts for this topic. Chinese Di2 Disc

[ Go to page: 1 2 3 ]

in Road

Ticlimax

36

4782

Wed Nov 22, 2017 12:12 am

Ticlimax View the latest post

There are no new unread posts for this topic. Attachment(s) Chinese Speedplay replacement titanium spindles

[ Go to page: 1 2 ]

in Road

Shrike

29

4023

Tue Nov 21, 2017 7:02 am

SampsC50 View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: Bing [Bot], bm0p700f, fbonde, Google [Bot], Miller, wingguy and 39 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited