Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About
It is currently Fri May 06, 2016 2:16 pm
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED

If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062


All times are UTC+01:00





Post new topic  Reply to topic  [ 3 posts ] 
Author Message
PostPosted: Thu Feb 28, 2013 12:16 pm 
Offline

Joined: Tue Jul 24, 2012 10:47 am
Posts: 180
Hi Guys,

have a question regarding this setup.

I have followed the Rotor manual and have this going from non drive side to drive side:

Crank arm and preload nut - washer 1mm NO DUST SEAL - BB - NO DUST SEAL large conical spacer - Crank arm.

Something doesn't seem right, the manual says to only use the dust seals on bare bearings without a shell but I am not sure? I also have no 'wavy' washer installed.

Does anyone have any experience of this setup on the BBright cervelos?

Cheers

James


Top
   
PostPosted: Thu Feb 28, 2013 12:29 pm 
Offline
Shop Owner

Joined: Sat Jun 13, 2009 4:02 am
Posts: 1980
Location: NoVA/DC
The manual states no dust shields because it assumes there will be some present from the pf30 bb assembly. So yes, use the dust shields that say SRAM pf30. Do not use any wavy washer, the crank has the preload collar that does the wavy washer's job.
Last thing is most Cervelos I've built required the extra 1mm spacer to be left off. Installing it resulted in binding. So don't be afraid to leave yours off if you need to.


Top
   
PostPosted: Thu Feb 28, 2013 1:14 pm 
Offline

Joined: Tue Jul 24, 2012 10:47 am
Posts: 180
Awesome, thanks for the quick response. The crank is indeed binding with the 1mm spacer.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 3 posts ] 

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. SRAM Red vs Rotor Chainset Question

in Road

crouchingpig

3

677

Sat May 23, 2015 7:27 am

rcb78 View the latest post

There are no new unread posts for this topic. Ultra torique in BB30 / pressfit 30

in Road

Body

10

587

Fri May 29, 2015 3:04 am

uraqt View the latest post

There are no new unread posts for this topic. PressFit Bottom Bracket brands. Is there any difference?

in Road

cdtf

9

425

Fri Apr 22, 2016 4:49 pm

eaglejackson View the latest post

There are no new unread posts for this topic. Power2max type s and rotor 3DF crankset or Rotor INPOWER

in Road

TomColnago

14

1141

Tue Nov 17, 2015 6:00 pm

Mario Jr. View the latest post

There are no new unread posts for this topic. Attachment(s) Poll - Does your Bottom Bracket Creak? PressFit Vs Threaded

[ Go to page: 1 2 3 4 5 ]

in Road

Jmdesignz2

62

2897

Mon Oct 19, 2015 10:56 am

Rush View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: Bing [Bot], burglarboycie, cdtf, ewwhite, Exabot [Bot], flafonta, Look565w, MSNbot Media and 24 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited