Weight Weenies
http://weightweenies.starbike.com/forum/

Schwalbe ZX deteriorating sidewall (clincher)
http://weightweenies.starbike.com/forum/viewtopic.php?f=3&t=112630
Page 2 of 2

Author:  lyot [ Mon Feb 18, 2013 12:38 pm ]
Post subject:  Re: Schwalbe ZX deteriorating sidewall (clincher)

I've had a couple of ZX's in 2012, rode about 1500km with them but didn't notice any problems at all. Only used butyl tubes

Author:  Weenie [ Mon Feb 18, 2013 12:38 pm ]
Post subject:  Re: Schwalbe ZX deteriorating sidewall (clincher)


Author:  sawyer [ Mon Feb 18, 2013 1:50 pm ]
Post subject:  Re: Schwalbe ZX deteriorating sidewall (clincher)

Some of the old contis had this problem. The GP4000 for example.

I haven't noticed it on Ultremo ZXs (black, 23, 25, and 28mm all in service) which, going by feel at least, seem pretty good on rolling resistance, grip and ride quality.

Author:  kampiakseli [ Mon Feb 18, 2013 3:15 pm ]
Post subject:  Re: Schwalbe ZX deteriorating sidewall (clincher)

I have had the same problem with two sets of Ultremos. The other set was not round either. Not going to buy them eny more.

Author:  martinSL [ Mon Feb 18, 2013 7:46 pm ]
Post subject:  Re: Schwalbe ZX deteriorating sidewall (clincher)

I've done some 1K miles on 2012 DDs with no problems (other than some cuts and nicks but I've ridden them on all all sort of crap) and close to 1K on 2013 (Vectran) ZX similarly with no issues. DDs are 25mm and ZXes are 23mm all black. I do like the ride and puncture resistance so far. Will be looking for the mentioned sidewall issues. If they can make 2K miles with no issues they get my vote.

Author:  project3 [ Tue Feb 19, 2013 12:06 am ]
Post subject:  Re: Schwalbe ZX deteriorating sidewall (clincher)

are we all talking about this problem?

Attachment:
IMG_3340.JPG
IMG_3340.JPG [ 120.04 KiB | Viewed 3088 times ]

Author:  fdegrove [ Tue Feb 19, 2013 12:28 am ]
Post subject:  Re: Schwalbe ZX deteriorating sidewall (clincher)

Hi,

Yes, we are. I only wish that was the only problem though....

Ciao, ;)

Author:  project3 [ Tue Feb 19, 2013 1:13 am ]
Post subject:  Re: Schwalbe ZX deteriorating sidewall (clincher)

another case with my rocket ron

Attachments:
Untitled-1.jpg
Untitled-1.jpg [ 84.73 KiB | Viewed 3083 times ]

Author:  Johnny Rad [ Wed Feb 20, 2013 2:16 am ]
Post subject:  Re: Schwalbe ZX deteriorating sidewall (clincher)

Left and right on my Ultremos. I cut them. They reappear. I cut more.

I haven't lost a tire from it, yet (fingers crossed!). I was worried, but no more.

Author:  fdegrove [ Wed Feb 20, 2013 2:30 am ]
Post subject:  Re: Schwalbe ZX deteriorating sidewall (clincher)

Hi,

project3 wrote:
so far no casualty or any disaster happen right? Has anyone check with schwalbe customer service?


Casualties, yes. Disaster? Depends on how you want to define it.....

In general Schwalbe's customers service have been more than forthcoming to replace the faulty product with what may potentially be another flaky one. Would you feel safe after that?

Doesn't this kind of behaviour ring a bell somwhere?

Ciao, ;)

Author:  project3 [ Tue Feb 26, 2013 1:44 am ]
Post subject:  Re: Schwalbe ZX deteriorating sidewall (clincher)

i've emailed them with photo attach since last week Tuesday and yet to receive any reply from them. Maybe they are investigating before they reply.

Author:  ninjanoir78 [ Tue Feb 26, 2013 1:49 am ]
Post subject:  Re: Schwalbe ZX deteriorating sidewall (clincher)

project3 wrote:
i've emailed them with photo attach since last week Tuesday and yet to receive any reply from them. Maybe they are investigating before they reply.


I did same thing.. and received reply...
They said, if you bought that from UK, ribble or probike kit... for exemple... we no longer offer warranty on that

sent from my galaxy SIII

Author:  Zachariah [ Sun Mar 03, 2013 5:21 am ]
Post subject:  Re: Schwalbe ZX deteriorating sidewall (clincher)

Is 179.5tpi now cause for concern?

Author:  nfecyle [ Sun Mar 03, 2013 7:01 am ]
Post subject:  Re: Schwalbe ZX deteriorating sidewall (clincher)

project3 wrote:
are we all talking about this problem?

Attachment:
IMG_3340.JPG


Hi,

I always have this problem with both Schwalbe Durano S and Conti Gatorskin on Mavic Aksium. I had concern about it but after riding the tires for while and had no problem, I thought this was normal.

Author:  Arky [ Sun Mar 03, 2013 7:37 am ]
Post subject:  Re: Schwalbe ZX deteriorating sidewall (clincher)

Relax folks, it is just a protective layer of fabric, like base tape on a tubular.

Author:  Weenie [ Sun Mar 03, 2013 7:37 am ]
Post subject:  Re: Schwalbe ZX deteriorating sidewall (clincher)


Page 2 of 2 All times are UTC+01:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/