Page 1 of 2

SRAM XX1 XG1199 11 Speed 10-42T Cassette

Posted: Sat Feb 09, 2013 8:10 am
by KLabs
Hi All, SRAM have released a XX1 XG1199 11 Speed 10-42T MTB Cassette and its for sale here ... http://www.chainreactioncycles.com/Models.aspx?ModelID=91007 and http://www.chainreactioncycles.com/Models.aspx?ModelID=91023 ... does anybody know much about SRAM new 11spd cassette and RD to go with it :-)

I know this is a MTB cassette but is SRAM intending to do something similar with their road cassette ...

PS: Here's a bit of info on the RD ...
SRAM XX1 11 Speed Rear Mech Technologies:
- X-Actuation - Designed specifically for SRAM XX1, X-Actuation keeps shifting sharp and consistent across the entire 10-42T cassette.
- X-Sync - A "wide tooth, narrow tooth" pattern is repeated around the pulley wheel, perfectly mirroring the chain's inner and outer links for maximum control.
- Cage Lock - With Cage Lock, wheel removal and installation - becomes faster and simpler. Just pushing the cage forward to create slack and lock it into place.
- Roller Bearing Clutch - Roller bearing clutch technology eliminates derailleur bounce and chain slap without sacrificing precision.
- X-Horizon - Straight parallelogram design limits all movement to the horizontal axis, which makes ghost shifting impossible while also reducing shift force. For quicker, more exact shifting, the large upper pulley offset design maintains a constant chain gap across all gears.

SRAM XX1 XG1199 11 Speed 10-42T Cassette

Posted: Sat Feb 09, 2013 8:10 am
by Weenie

Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



Re: SRAM XX1 XG1199 11 Speed 10-42T Cassette

Posted: Sat Feb 09, 2013 9:32 pm
by stephen@fibre-lyte
This is slightly off topic, but I'm intrigued how that shop can have a cassette for XX1 in stock but the derailleur isn't available until the end of April? :noidea:

Re: SRAM XX1 XG1199 11 Speed 10-42T Cassette

Posted: Sat Feb 09, 2013 9:52 pm
by wingguy
If you'd dealt with SRAMs distribution in the UK you might not be too surprised.

To the OP, I've seen it (the cassette) and it looks mental. Beyond that I can't help :P

Re: SRAM XX1 XG1199 11 Speed 10-42T Cassette

Posted: Sat Feb 09, 2013 10:26 pm
by Briscoelab
Wait till Sea Otter ;) that's all I can say.

Re: SRAM XX1 XG1199 11 Speed 10-42T Cassette

Posted: Sun Feb 10, 2013 12:40 am
by cerro
If I remember right Ryan Trebon was testing some new things from Sram so maybe

Re: SRAM XX1 XG1199 11 Speed 10-42T Cassette

Posted: Sun Feb 10, 2013 10:01 am
by KLabs
42t sprocket is huge and it can apparently be as large as 44T. With a sprocket that large there should not be an issue with the RD cage striking the spokes ...

So one could run 10-44T cassette with 44/46T crankring for a road setup, although the largest crankring for the MTB setup is 38T :-)

Re: SRAM XX1 XG1199 11 Speed 10-42T Cassette

Posted: Sun Feb 10, 2013 4:32 pm
by djconnel
KLabs wrote:42t sprocket is huge and it can apparently be as large as 44T. With a sprocket that large there should not be an issue with the RD cage striking the spokes ...

So one could run 10-44T cassette with 44/46T crankring for a road setup, although the largest crankring for the MTB setup is 38T :-)


10 instead of 11 saves 5 teeth from the front, 10 instead of 12 saves 9 teeth from the front. So if I feel the need for 53/12, for example, I can drop to 44/10 at the same ratio. Meanwhile 44/42 is the same as 34/32 so the 10-44 gives the same range as a 34-53/12-32. That's hugh. Only issue is the jumps, for example: 10-12-14-16-18- 21-24-27-31-36-42 would work well, I think: big top end gear just for descents, then decent spacing through the cruising gears, then bail out gears at the bottom end. These aren't racing ratios but would work well for Gran Fondo type riding.

Re: SRAM XX1 XG1199 11 Speed 10-42T Cassette

Posted: Sun Feb 10, 2013 5:13 pm
by ultimobici
djconnel wrote:
KLabs wrote:42t sprocket is huge and it can apparently be as large as 44T. With a sprocket that large there should not be an issue with the RD cage striking the spokes ...

So one could run 10-44T cassette with 44/46T crankring for a road setup, although the largest crankring for the MTB setup is 38T :-)


10 instead of 11 saves 5 teeth from the front, 10 instead of 12 saves 9 teeth from the front. So if I feel the need for 53/12, for example, I can drop to 44/10 at the same ratio. Meanwhile 44/42 is the same as 34/32 so the 10-44 gives the same range as a 34-53/12-32. That's hugh. Only issue is the jumps, for example: 10-12-14-16-18- 21-24-27-31-36-42 would work well, I think: big top end gear just for descents, then decent spacing through the cruising gears, then bail out gears at the bottom end. These aren't racing ratios but would work well for Gran Fondo type riding.

Problem is the chain is designed to work exclusively with a single ring. Unless the SRAM 11 speed chain is the same dimensions as Campag or Shimano it's going to be a non-starter. Then you have the issue of chain wrap if you have a double chainring setup. (44-34)+(42-10)=42T difference, whereas a regular compact needs (50-34)+(32-11)=36T . That's a lot of chain to accommodate necessitating a monster cage, not to mention the monumental gaps you comment on. Plus where are you going to find a mech to use?

Re: SRAM XX1 XG1199 11 Speed 10-42T Cassette

Posted: Sun Feb 10, 2013 5:19 pm
by MagnusH
@ultimobici:
djconnel is suggesting a single chainring (44T) combined with a 10-42 cassette.

Re: SRAM XX1 XG1199 11 Speed 10-42T Cassette

Posted: Sun Feb 10, 2013 5:50 pm
by winky
stephen@fibre-lyte wrote:This is slightly off topic, but I'm intrigued how that shop can have a cassette for XX1 in stock but the derailleur isn't available until the end of April? :noidea:



Maybe so that the cyclocross racers can buy the new 11 speed Dura-Ace drivetrains for use with their new 135mm rear spaced fancy disc brake frames. And since Shimano doesn't make a 135mm cassette, road or mtn, that is compatible with 11 speeds, then these cyclocross racers can also just buy the 135mm SRAM XX1 hub and cassette.

In summary:
135mm disc-brake compatible frame + 135mm SRAM XX1 hub & cassette + 11 speed Dura-Ace drivetrain

Re: SRAM XX1 XG1199 11 Speed 10-42T Cassette

Posted: Sun Feb 10, 2013 6:06 pm
by ultimobici
MagnusH wrote:@ultimobici:
djconnel is suggesting a single chainring (44T) combined with a 10-42 cassette.

doh!

SRAM XX1 XG1199 11 Speed 10-42T Cassette

Posted: Sun Feb 10, 2013 9:30 pm
by Frankie - B
I also received a few hints that sram is working on 11 speed.


Sent from my iPad using Tapatalk HD

Re: SRAM XX1 XG1199 11 Speed 10-42T Cassette

Posted: Sun Feb 10, 2013 10:16 pm
by HammerTime2
Would that be of the cable, hydraulic, or electronic persuasion(s)?

Re: SRAM XX1 XG1199 11 Speed 10-42T Cassette

Posted: Mon Feb 11, 2013 12:59 am
by KLabs
The XX1 reviews show cable actuation ... it would be excellent for Grand Fondos and Touring, and theoretically requires less maintenance and appears to be more durable and overall lighter :-)

Re: SRAM XX1 XG1199 11 Speed 10-42T Cassette

Posted: Mon Feb 11, 2013 8:52 am
by NS
If the derailleur isn't available until April the one I have just fitted to my stumpjumper must be an imposter!

That's like saying you can't sell a pair of gloves if you don't have the matching hat?

Re: SRAM XX1 XG1199 11 Speed 10-42T Cassette

Posted: Mon Feb 11, 2013 8:52 am
by Weenie

Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com