I need a favour from one that has a Roval wheelset with the 24h rear hub using 2:1 lacing. I need a measurement of a rear DS spoke from the spoke head to where it enters the rim and the depth of the rim. Appreciate any help.

_________________
It's online again:The Machinist

I'm visiting a shop who has these wheels today. If I don't forget it I'll be writing it down.

_________________
'Tape was made to wrap your GF's gifts, NOT hold a freakin tire on.'

Follow me on twitter. I try to be interesting
On Facebook!

Thanks Frankie that would be great. Then I can get the wrong ones I have replaced

_________________
It's online again:The Machinist

I believe only specialized services roval wheels. warranty reasons I am sure-David

_________________
[img]<iframe%20height='160'%20width='300'%20frameborder='0'%20allowtransparency='true'%20scrolling='no'%20src='http://app.strava.com/athletes/1677950/activity-summary/ddf436fc1ca509b20d4637cfa80c928da771d2c6'></iframe>[/img]

Now I can answer my own question, as I went by one of the local S dealers today who had a lot of the Roval wheels on display. I measured a pair of SL45 wheels and as the name indicates this rim is 45mm. On the rear DS i measured the spoke to 249mm from spoke end to the rim. The NDS was 264mm. The rim and nipples take up about 12mm and adjusting for the difference in rim height I decided on 260mm for the DS and 274mm for the NDS. I'll be sure to post the result, so the information is available to others.

_________________
It's online again:The Machinist