Page 1 of 1

willier cento 1 superlagera bb question.

Posted: Sat Feb 02, 2013 5:06 pm
by wshiong
Any idea how to fit a. clavicula crank into this frame?

As shown at picture. Bb seems to be shorter.

Re: willier cento 1 superlagera bb question.

Posted: Sat Feb 02, 2013 7:54 pm
by nlouthan
Is the Clavicula a regular BSA crank? If so, you need different bearings that press into the BB and a little plastic spacer/collars that go between the crank axle and the bearings. You can get the spacers from a Wilier dealer. The bearings are size 6805. If the crank is not a standard BSA, I don't think it will work.

Re: willier cento 1 superlagera bb question.

Posted: Sat Feb 02, 2013 7:54 pm
by Weenie

Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



Re: willier cento 1 superlagera bb question.

Posted: Sun Feb 03, 2013 2:31 am
by wshiong
Yes, its the standard bsa bb. The other photo shows 6806 bearing.

Now i concern about the length of the bb, it seems shorter then expected. the end part that the arm goes in are shorter.

Did you have any photo shows after installation? anyone done before?

Re: willier cento 1 superlagera bb question.

Posted: Sun Feb 03, 2013 5:14 am
by thisisatest
It will not fit.

Re: willier cento 1 superlagera bb question.

Posted: Sun Feb 03, 2013 9:31 pm
by kgt
+1

Re: willier cento 1 superlagera bb question.

Posted: Mon Feb 04, 2013 7:06 am
by wshiong
too bad :evil:

Re: willier cento 1 superlagera bb question.

Posted: Tue Feb 05, 2013 1:46 am
by YinYang
Hit up the guys @ twohubs.com; they managed to install the Clavicula on Wilier frames (Zero 7 & Cento Uno).


http://twohubs.com/news.aspx?showarticle=169

Re: willier cento 1 superlagera bb question.

Posted: Tue Feb 05, 2013 2:48 am
by thisisatest
the Cento1 at Twohubs is the SR version. That, and the Zero7, have 386evo bb dimensions, for a 30mm spindle 86mm long. The original Cento1 is basically bb86/bb90, which is for a 24mm spindle. there's just not enough room on this one.

Re: willier cento 1 superlagera bb question.

Posted: Tue Feb 05, 2013 2:48 am
by Weenie

Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



Re: willier cento 1 superlagera bb question.

Posted: Fri Feb 08, 2013 4:19 am
by wshiong
Our one is too short.. we already give up.