Time xpresso pedals
Moderator: robbosmans
-
- Posts: 683
- Joined: Wed Apr 11, 2012 3:40 am
Just want to follow up, it wasn't actually the pedals making the clicking sound. I'm having some UT bearing issue on the non drive side. For once the "bb creak" is coming from the bb!
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
ok thanks brighenne , i started to look back through this thread but there were too many pages , I was sure they both have carbon (reinforced plastic) bodies but i have have snooped around online tonight and saw the mavic zxellium slr's have an alloy top plate instead of Stainless steel and wondered if that was the difference between #8 carbon and #10 ?
edited to say. i notice the new white #8 pro have no mention of carbon , neither do the #6 plasma or the regular white #6
edited to say. i notice the new white #8 pro have no mention of carbon , neither do the #6 plasma or the regular white #6
The Time Sport USA catalog runs through all of the differences. timesportusa dot com
There is a link for the catalog if you scroll to the bottom.
I believe #6 and #8 have hollow steel axles and composite (not carbon) bodies. #6 has a stainless steel plate, and #8 has an aluminum plate. The #10 upgrades to a carbon body and the #12 gets a titanium axle.
I picked up the #6. Easier to clip-in and out than SPD-SL in my opinion. However, I started developing right knee pain after 30 miles. I haven't been able to get it to go away after adjusting the cleat position. I'm going to switch back to SPD-SL and see what happens. Pretty bummed, as I really liked the pedals. Great weights too. I think mine came in at 210 for the set, instead of the advertised 204. Still pretty light for the $.
There is a link for the catalog if you scroll to the bottom.
I believe #6 and #8 have hollow steel axles and composite (not carbon) bodies. #6 has a stainless steel plate, and #8 has an aluminum plate. The #10 upgrades to a carbon body and the #12 gets a titanium axle.
I picked up the #6. Easier to clip-in and out than SPD-SL in my opinion. However, I started developing right knee pain after 30 miles. I haven't been able to get it to go away after adjusting the cleat position. I'm going to switch back to SPD-SL and see what happens. Pretty bummed, as I really liked the pedals. Great weights too. I think mine came in at 210 for the set, instead of the advertised 204. Still pretty light for the $.
-
- Posts: 33
- Joined: Mon Oct 28, 2013 11:08 pm
Anyone with the high-end models able to comment on the added performance of the low weight and/or fancy bearings? I'm not much of a WW or dentist but I'm very tempted to the get the 15 and pedal air...
- ultimobici
- in the industry
- Posts: 4462
- Joined: Sun Nov 21, 2004 2:45 pm
- Location: Trento, Italia
- Contact:
I have both the two top models from Mavic, the SLR & SLR Ti (10&12). I'm toying with the idea of getting the Mavic version of the 15 but not sure the 70% extra is worth it.SkippyMcJimmelstein wrote:Anyone with the high-end models able to comment on the added performance of the low weight and/or fancy bearings? I'm not much of a WW or dentist but I'm very tempted to the get the 15 and pedal air...
Sent from my iPad using Tapatalk
-
- Posts: 33
- Joined: Mon Oct 28, 2013 11:08 pm
Are you glad you went with the high-end models?
- ultimobici
- in the industry
- Posts: 4462
- Joined: Sun Nov 21, 2004 2:45 pm
- Location: Trento, Italia
- Contact:
Yep. No complaints at all.
Sent from my iPad using Tapatalk
Sent from my iPad using Tapatalk
Got a set of #10s this week, couple of rides, like them so far. Had MTB-type SPDs before. Walking is much better now, SPD cleats on road shoes are hell.
The xpresso 10 are 192g, cleats and hardware 84g.
The xpresso 10 are 192g, cleats and hardware 84g.
-
- Posts: 349
- Joined: Tue Apr 27, 2010 2:36 am
- Location: Taylosville, Utah
There are conflicting opinions on whether or not the Times and Mavics are different.
No one has shown any actual proof that the quality and/or parts (other than color) are different.
BTW: I own 3 sets of the Time 12s, with over 8000 miles between them (mainly on two of the sets), and they have been great.
No one has shown any actual proof that the quality and/or parts (other than color) are different.
BTW: I own 3 sets of the Time 12s, with over 8000 miles between them (mainly on two of the sets), and they have been great.
- HammerTime2
- Posts: 5813
- Joined: Thu May 04, 2006 4:43 pm
- Location: Wherever there's a mountain beckoning to be climbed
TonyMM wrote:What are the differences between the Mavic and the time pedales (cannot find any ....except the color and the brand/ logo...) ?
I think this was prior to the introduction of the Xpresso 15, nevertheless, I suspect the claim is that the corresponding Mavic pedal is (claimed to be) identiical as well.On March 4, 2014 in this thread. Mavic USA Communications Guy MavicZack wrote:the Mavic pedals are identical to the Time Xpresso series. The Zxellium SLR Ti corresponds to Xpresso 12.
Mavic and Time signed an agreement to co-develop pedal systems. It's a win for Mavic because the Time pedals are fantastic on their own, but even better (we would say) with our shoes. In particular the low weight pairs well with our shoes (very light), as do the biomechanics and low stack height (Mavic soles are super thin which can result in the lowest ball of foot to spindle distance available).
...
don't hesitate to hit me with PM for specific questions, only because I get email notification and can respond more promptly.
-zack
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
how does the time Xpresso 15 perform against the Dura Ace 9000 in terms of power transmission and smoothness?
(for example the Dura Ace 9000 have 3 bearing axle: 2-ball and 1-wide roller bearing and the Xpresso 15 have these new ceramic speed bearings)
(for example the Dura Ace 9000 have 3 bearing axle: 2-ball and 1-wide roller bearing and the Xpresso 15 have these new ceramic speed bearings)