Page 1 of 2

Stripped Specialized Toupe Pro

Posted: Sat Jan 26, 2013 12:16 am
by Imaking20
A few weeks back I finally got the nerve to strip my Toupe Pro. The saddle had become a little less comfortable to me and the white didn't go with any of my bikes so I embraced the project.

I apologize for the lack of quality photos. The lighting in my work area is pretty poor.

Not a bad weight to start with
Image

Image

Less padding
Image

And after A LOT of elbow grease
Image

Image


I thought about putting some sort of grip on the saddle but considering the size and shape of it - there's really nowhere to slide. To my delight, the shape is actually a lot more comfortable for me now and there is a good amount of "spring" in it to add a bit of comfort.

Stripped Specialized Toupe Pro

Posted: Sat Jan 26, 2013 12:16 am
by Weenie

Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



Re: Stripped Specialized Toupe Pro

Posted: Sat Jan 26, 2013 12:28 am
by odin99
looks good. and the weight is even better! sub 100g is outstanding. I have pro as well, but the start weight is 10g more! doh.

i recently attacked my beat up toupe ti. in this tread: viewtopic.php?f=3&t=110261

still figuring out if i'm going to epoxy the cracks and try using it. i don't have the nerve to strip my toupe pro yet. although sub 100g makes it much more tempting!

Re: Stripped Specialized Toupe Pro

Posted: Sat Jan 26, 2013 12:29 am
by odin99
how did you get the glue off? it was hard, hu?

Stripped Specialized Toupe Pro

Posted: Sat Jan 26, 2013 4:25 am
by HaroldC
What exactly did the "elbow grease" involve? Did you apply something to the shell to get that finish?


Sent from my iPad using Tapatalk HD

Re: Stripped Specialized Toupe Pro

Posted: Sat Jan 26, 2013 5:57 am
by Imaking20
I repeatedly sprayed the surface with WD-40 and scraped the glue off with my fingernail and a credit card. It was seriously time consuming.

There is nothing applied for a finish - after I was done I washed it with Dawn.

Re: Stripped Specialized Toupe Pro

Posted: Sat Jan 26, 2013 6:58 am
by AGW
That looks surprisingly good, better than a stock Toupe to my eye.

Stripped Specialized Toupe Pro

Posted: Sun Jan 27, 2013 4:57 am
by HaroldC
Imaking20 wrote:I repeatedly sprayed the surface with WD-40 and scraped the glue off with my fingernail and a credit card. It was seriously time consuming.

There is nothing applied for a finish - after I was done I washed it with Dawn.


Impressive! Not sure if I have the guts to strip my Romin Pro.


Sent from my iPad using Tapatalk HD

Re: Stripped Specialized Toupe Pro

Posted: Sun Jan 27, 2013 8:20 am
by Peter_E
I thought that Specialized carbon railed saddles didnĀ“t work with Ritcheys isp stubby (I even think I got that reply from Specialized when I mailed them). No issues?

Re: Stripped Specialized Toupe Pro

Posted: Mon Jan 28, 2013 1:40 am
by Imaking20
Harold - I don't know how comfortable the Romin would be after a strip job considering so much of it's shape seems to come from the padding and not necessarily the plastic. I'll let you know when I pick up another Romin and gut it :)


Peter - Specialized isn't fond of their saddle having any pressure from the sides which this clamp technically does. That said, no carbon-only saddle rails are supposed to be clamped from the side. I have the clamp kit for standard round rails and the oversized for Fizik - the latter is what I'm using for the Toupe. It works. I'm sure it would clamp a little easier with the Selle clamp kit though.

Re: Stripped Specialized Toupe Pro

Posted: Mon Jan 28, 2013 2:59 am
by HaroldC
Imaking20 wrote:Harold - I don't know how comfortable the Romin would be after a strip job considering so much of it's shape seems to come from the padding and not necessarily the plastic. I'll let you know when I pick up another Romin and gut it :)


Thanks. I'll let you gut it first! :wink:

Re: Stripped Specialized Toupe Pro

Posted: Mon Jan 28, 2013 5:01 am
by Podunk
Imaking20 wrote:I repeatedly sprayed the surface with WD-40 and scraped the glue off with my fingernail and a credit card. It was seriously time consuming.

There is nothing applied for a finish - after I was done I washed it with Dawn.


Next time try something that will get rid of adhesive.
i.e. nail polish remover (acetone) usually will dissolve adhesives but be careful as it can also denature plastic if left on too long.
Put acetone on a cloth and wipe it on the saddle. It should turn the adhesive to mush which can be scraped off.

Re: Stripped Specialized Toupe Pro

Posted: Mon Jan 28, 2013 5:08 am
by Imaking20
Acetone nor rubbing alcohol worked worth a damn. Perhaps you've never used WD-40 to remove gunk? You'd be surprised..

Re: Stripped Specialized Toupe Pro

Posted: Tue Jan 29, 2013 2:37 am
by Podunk
Imaking20 wrote:Acetone nor rubbing alcohol worked worth a damn. Perhaps you've never used WD-40 to remove gunk? You'd be surprised..

I have a typical process I go through with solvents.

I usually use: true acetone, nail polish remover (diluted acetone), isopropyl alcohol, ethyl alcohol...then I make my way to random stuff like WD-40, PB Blaster etc.

I guess I should try WD more.

Re: Stripped Specialized Toupe Pro

Posted: Tue Jan 29, 2013 3:45 am
by Imaking20
In fairness, when I say I started with acetone - it was nail polish remover because it was handy. Then came rubbing alcohol and finally WD. Sounds as though we have a similar pecking order though

Re: Stripped Specialized Toupe Pro

Posted: Tue Jan 29, 2013 12:39 pm
by MagnusH
Anybody tried stripping a Toupe S-Works?

I have one that weighs in at 117 gram (130 mm).
I considered stripping it, but as the padding seems rather minimal, i doubt it would end out weighing less than a stripped Toupe Pro.

Re: Stripped Specialized Toupe Pro

Posted: Tue Jan 29, 2013 12:39 pm
by Weenie

Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com