Hi,
Just bought a TCR Advanced 2012 frame, and the LBS guy said he did not fitted inline barrel adjusters because they don't go too well in this frame, it seems the bend of the cable/housing is not appropriate for an OK shift.
What is your experience?
Regards
Using inline barrel adjusters on a TCR Advanced 2012
Moderator: robbosmans
never used them....no need if set up well...
Sent from my GT-I8160 using Tapatalk 2
Sent from my GT-I8160 using Tapatalk 2
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
I just built up a 2012 tcr advanced frame and used both barrel adjusters.
The one for the rear really impacts the shifting negatively and I will be removing it. The one for the front is fine and is really necessary, unless you feel like using a 4th hand and wasting 20minutes setting up the cable tension for the front derailleur. You also already have a barrel adjuster on the rear derailleur so really no need for it anyway.
The impact of the inline barrel adjusters really depends on bar choice, stem choice, stack and the frame size but I would say in most cases it probably won't work well.
-EP
The one for the rear really impacts the shifting negatively and I will be removing it. The one for the front is fine and is really necessary, unless you feel like using a 4th hand and wasting 20minutes setting up the cable tension for the front derailleur. You also already have a barrel adjuster on the rear derailleur so really no need for it anyway.
The impact of the inline barrel adjusters really depends on bar choice, stem choice, stack and the frame size but I would say in most cases it probably won't work well.
-EP