HOT: Active* forum members generally gain 5% discount at starbike.com store!
Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Articles FAQ Contact About




Post new topic Reply to topic  [ 7 posts ] 
Author Message
PostPosted: Thu Dec 06, 2012 9:03 pm 
Offline

Joined: Thu Mar 03, 2011 9:32 pm
Posts: 8
Just got a very gently used S5 and I'm getting the fit dialed in. Due to it's tall head tube, I'll likely need (and want :wink: ) to slam the stem all the way down with a 'Slam that stem' headset cap. The steerer tube is uncut and it appears from what I can see the insert is uncut as well. My question is this: How long is that insert? It look like I'll need to take 5-6cm off the steerer tube and as such the star nut will need to go in an equivalent amount. If that insert is short, I could just use an expansion plug I suppose, seems like people have done this before.

Any thoughts? Thanks in advance.


Top
 Profile  
 
PostPosted: Thu Dec 06, 2012 9:47 pm 
Offline

Joined: Thu Nov 17, 2011 4:29 pm
Posts: 138
Make sure the insert is actually glued in first. many Cervelo dealers just wedge it in at first until the customer sorts their position

Also many have found out that putting a long bolt in the star nut and hitting it with a hammer often unglues the insert before the star nut pops down and out

_________________
Cervelo S3 2011. Blinged 6.718 Kg


Top
 Profile  
 
Posted: Thu Dec 06, 2012 9:47 pm 


Top
  
 
PostPosted: Thu Dec 06, 2012 10:01 pm 
Offline

Joined: Sat Apr 18, 2009 8:59 am
Posts: 527
Location: Surrey UK
R5 insert 70mm.
Get extralite ultrastar, it will save you few extra grams.

_________________
Cervelo R5 VWD 5637g/12.43lb
Cannyon Ultimate slx 5592g/12.33lb
Pronghorn XC SW Race 8284g/18.26lb


Top
 Profile  
 
PostPosted: Fri Dec 07, 2012 12:22 am 
Offline
Shop Owner

Joined: Sat Jun 13, 2009 4:02 am
Posts: 1951
Location: NoVA/DC
Very often the very bottom of the insert has little epoxy, so it won't stay if you cut off that much. It's SUPPOSED to be fully covered in epoxy, but that's how I've seen inserts that were glued elsewhere.
If you try to keep the insert, this may sound obvious, but lower the star nut first, then cut.


Top
 Profile  
 
PostPosted: Fri Dec 07, 2012 12:53 am 
Offline
User avatar

Joined: Wed Aug 31, 2005 1:01 am
Posts: 46
Location: Delaware, OH
Add me to the list of people who have learned that the insert can be problematic due to insufficient epoxy coverage. My friend and I purchased Cervelos last winter during their promotion to buy 2 bikes, and both have had the insert come loose due to poor epoxy coverage. AS with previous advice, check to make sure that your insert is adequately secured.
Don't want to slag on Cervelo too much.... I love my R3 Team otherwise.
Good luck!

_________________
The more you suffer, the closer you get to transcendence.
It's not the mountain you're climbing, it's yourself. If you don't want to know, stay at the bottom.


Top
 Profile  
 
PostPosted: Fri Dec 07, 2012 1:44 am 
Offline

Joined: Mon May 05, 2008 5:15 pm
Posts: 394
I just received my S5 too, this is the insert you guys are talking about correct ? Can I cut that inser into half ?

Image


Top
 Profile  
 
Posted: Fri Dec 07, 2012 1:44 am 


Top
  
 
PostPosted: Mon Mar 11, 2013 9:01 pm 
Offline

Joined: Mon Jun 23, 2008 8:52 am
Posts: 446
Hello guys,

I do have new R5 VWD, size 56. I assembled the bike and rode like 400km on it. The headtube area seems to me a little bit nervous, not very much stiff. I used to have an R3, 2007 model, size 58, so the lack of R5's HT area stifness surprises me...I expected stiffer HT from the R5.

So, it just came to my mind if the insert is bonded perfectly in the steerer tube or not (epoxy not fully covering the insert). If not, could it play any role in the overall stiffness of the system?
My understanding is that the insert is there to be a support for the steerer tube in cases of crash, not to be there for stifness, am I right?

FYI: I use only 5mm spacer under the stem, the bottom of the insert is deep under the upper bearings.

P.S Maybe I am too strong after winter (a lot of country skiing > my upper body is stronger so the bike seems not being stiff enough :-) )

Thank You for any inputs.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 


Who is online

Users browsing this forum: audiojan, Butcher, Google Adsense [Bot], mitchgixer6, Nebby, willside and 50 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Fork steerer tube too short! What can be done?

in Road

CAIOS

1

471

Wed Jan 08, 2014 2:48 pm

legs 11 View the latest post

There are no new unread posts for this topic. Giant TCR Composite 1 steerer tube

in Road

severall

3

257

Fri Mar 07, 2014 9:36 am

severall View the latest post

There are no new unread posts for this topic. cannondal SI bb30 pedal insert

in Road

tomgag

3

285

Wed Mar 05, 2014 9:44 pm

tomgag View the latest post

There are no new unread posts for this topic. Moving a previously installed Alpha Q fork insert

in Road

FastforaSlowGuy

1

210

Fri Oct 11, 2013 4:03 am

goodboyr View the latest post

There are no new unread posts for this topic. Where to cut steerer?

in Road

PoorCyclist

7

807

Wed Jul 03, 2013 3:48 pm

stella-azzurra View the latest post


It is currently Wed Apr 16, 2014 4:06 pm

All times are UTC + 1 hour




Advertising   –  FAQ   –  Contact   –  Convert   –  About

© Weight Weenies 2000-2013
hosted by starbike.com


How to get rid of these ads? Just register!


Powered by phpBB