Repairing Vuma Quad

Back by popular demand, the general all-things Road forum!

Moderator: robbosmans

User avatar
monchito
Posts: 50
Joined: Mon Apr 16, 2012 7:46 pm
Location: Barcelona

by monchito

Hi everybody. I own a 180mm Vuma Quad for around three years and i´m a little bit dissapointed and not surprised that zipp stop making them, nor do I totally believe the explanations they give us about: (Please note Zipp has discontinued this item to focus on our core product lines of wheels, bars, stems and seatposts) :hmm: .

Anyways, i still think that they are light, stiff and beautiful. My complain is that they are no resistant enough. The first problem was with a chainring thread; it dies and i had to made a bigger hole to put a regular chainring bolt. Anyways, not a big deal.

But some months ago, i feel some play in BB. At first i think that the bearings had some kind of movement in the BB, but when i dismounted it i find that was the aluminium axel that had looseness with the carbon rod. It already was a big deal :shock: .

And here i show the proces i did to repair it:

The first thing I had to do was a tool to remove the left crank nut...

Image
DSC02992 por monchito3000, en Flickr

... and a tool to separate the axel from de crank.

Image
DSC02990 por monchito3000, en Flickr

Here are some weights:

Image
DSC02984 por monchito3000, en Flickr

I thought in lightening the axis, but finally it seems to me a litle bit dangerous.

Image
DSC02986 por monchito3000, en Flickr

then I needed a device to glue the rods perfectly aligned.

Image
utillaje por monchito3000, en Flickr

and a centered substitutes for pedal axles.

Image
centrajes biela por monchito3000, en Flickr

before glue the cranks I realized that the left crank nut would not tighten against carbon fiber, so I had to fill it with epoxy putty. This particular case is inexcusable and I think it's because of a poor design. The nut should not have been just a embellisher. :oops: :oops:

Image
DSC02994 por monchito3000, en Flickr

and finally i could glue the cranks:

Image
DSC03139 por monchito3000, en Flickr

Image
DSC03140 por monchito3000, en Flickr

Image
DSC03114 por monchito3000, en Flickr

as glue i used a mix of epoxy and these little pieces of carbon fiber

Image
DSC03095 por monchito3000, en Flickr

And here the cranks completed.

Image
vuma quad repaired por monchito3000, en Flickr

I hope to use the cranks for a few years more. May be i´m too naïf, but I think a +1000€ cranks should not have given me any problem, at less, not so soon. Anyways, it still seems a happy ending. :P

User avatar
Stolichnaya
Posts: 2621
Joined: Wed Oct 06, 2004 6:55 pm
Location: Vienna, AUT

by Stolichnaya

Way cool. Impressive stuff, Monchito.
Please be sure to revisit this post to give an update on how they run when reinstalled and in use.
Those cranks are beautiful and unfortunately proprietary. Good on you for giving them a new lease on life.

by Weenie


Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



BobSantini
Posts: 292
Joined: Sun Jul 10, 2011 9:03 am

by BobSantini

Nice job :thumbup:
That workshop looks like the foundries of Mordor.
r o y g b i v

User avatar
Lig
Posts: 349
Joined: Sun Dec 19, 2010 3:57 pm
Location: UK

by Lig

Hi Monchito,

Thats looks like a job very well done - but you will have to see if they hold up!!

I have the exact same problem (as i am sure do many). So I bought a new crank and have my old Vuma sitting in my shed as i dont know what to do with it!! If your process works I could pay you to fix mine :lol:

Good luck,
Lig.

Brandonnie
Posts: 94
Joined: Sat May 12, 2012 5:48 am

by Brandonnie

Beautiful.

artray
Posts: 1347
Joined: Fri Oct 07, 2011 2:08 pm

by artray

Brilliant :thumbup:

madonna
Posts: 87
Joined: Mon Jun 05, 2006 2:03 am

by madonna

Bingo !!!!!! :thumbup: :thumbup: :thumbup:

You just shamed ZIPP.

User avatar
timsterc
Posts: 35
Joined: Wed Mar 19, 2008 10:08 pm
Location: Moss Beach

by timsterc

Brilliant !!! :beerchug:
My Ride - Parlee Z5

User avatar
Mattias Hellöre
in the industry
Posts: 531
Joined: Fri Sep 23, 2005 6:34 pm
Location: Insjön, SWEDEN
Contact:

by Mattias Hellöre

That´s right approach to do things.
If the manufacturer stops producing things.Ask yourself why? A big fail in business math to stop selling something that is paid for.

The second problem here and many many cranks have is the corrosion, in the end the bond don´t hold up. Sometimes it´s just a lemon.

My experience is not only theorethical, I have broken Storcks, Lightning and so on here in my shop.
Experimental Prototype

Fatbiker
Posts: 874
Joined: Tue Aug 08, 2006 1:41 pm

by Fatbiker

Sweet work mate!

User avatar
monchito
Posts: 50
Joined: Mon Apr 16, 2012 7:46 pm
Location: Barcelona

by monchito

BobSantini wrote:Nice job :thumbup:
That workshop looks like the foundries of Mordor.


Ja,ja,ja :lol: :lol: :lol:

You are right. Here i am working:

Image
smigol por monchito3000, en Flickr

:up:

User avatar
monchito
Posts: 50
Joined: Mon Apr 16, 2012 7:46 pm
Location: Barcelona

by monchito

Thanks to everybody :thanx: :thanx:

At moment i didn´t too many Kms. You know, winter and so... But with around 300 Kms did not appear any problem. Anyways, i want to wait to climb some ports with suffering and misery before claim victory. Then i´ll be glad to repair yours.

I'll keep you informed.

User avatar
monchito
Posts: 50
Joined: Mon Apr 16, 2012 7:46 pm
Location: Barcelona

by monchito

Yesterday i did some kmts and, oh no¡¡¡, i felt the looseness again. It´s very small, and not always there, but it is anyway.

!!!!For the eternal eye of Sauron¡¡¡¡ :evil: :evil:

So i have to disassemble and see if it´s the side i already repaired or if it´s the other side, and i don´t know which could be worst.

i´m beginning to hate Vuma´s.

User avatar
monchito
Posts: 50
Joined: Mon Apr 16, 2012 7:46 pm
Location: Barcelona

by monchito

Hi, finally i repaired (again) the Vuma Quad´s axle. This time i did three little slots, 16 little holes and a kind of battlement on the top. I just used epoxy without carbon dust this time, and i cured it at least for 6 hours at 60ºC after 16 hours at 23ºC.

Here are the pictures:

Image
Eje 2º intent por monchito3000, en Flickr


Image
Eje 2º intent (2) por monchito3000, en Flickr

Past time i didn´t care about temperature or cure times :noidea: and just scratched the aluminium with too much faith in epoxy´s adhesive power.
I really hope not have to repair it again.

by Weenie


Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



mnmasotto
Posts: 581
Joined: Mon Jun 06, 2011 7:16 pm
Location: Irvine, CA

by mnmasotto

You are superman!!!

Post Reply