Page 1 of 1

DA 7850 rebuild - 16H rim recommendations

Posted: Mon Dec 03, 2012 8:21 am
by Privateer
I've worn the sidewalls on my Dura Ace 7850s into a lovely concave shape. I'd like to rebuild the hubs onto new rims before they fail and I lose some teeth.

I'd like to use either light or aero rims, or it isn't worth rebuilding them compared to the price of a replacement set of training wheels on eBay. Cost is a consideration - Zipp and Enve are not options.

I wanted to go with Stans Alpha 340, but they aren't available in a 16 hole drilling. Farsports might be an option.

What are your recommendations for either a light (ideally tubeless) or aero rim in a 16/20 drilling?

Re: DA 7850 rebuild - 16H rim recommendations

Posted: Mon Dec 03, 2012 9:08 am
by istigatrice
Privateer wrote:I wanted to go with Stans Alpha 340

and for a good reason... I wouldn't trust that build at 57kg...

I would have a look at the kinlin XC-279 or BHS c472w, not sure if it comes in a 16h, but it looks a very stout rim

Re: DA 7850 rebuild - 16H rim recommendations

Posted: Mon Dec 03, 2012 9:08 am
by Weenie

Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



Re: DA 7850 rebuild - 16H rim recommendations

Posted: Mon Dec 03, 2012 11:25 am
by HillRPete
Generic 16h rims are very scarce, your best bet would probably be to score a whole wheel on ebay/classifieds, as replacement rim pricing is also quite steep. Also look around for the Ultegra counterpart, you might be able to rebuild the rim on the DA hub, if that's a priority.

Re: DA 7850 rebuild - 16H rim recommendations

Posted: Mon Dec 03, 2012 3:02 pm
by racingcondor
The velocity deep V is worth a look (comes in a 16 hole according to the site). I'm not sure that there are any Alu rims that will actually build into a stiff enough wheel with so few spokes though.

If you can spend a little more then something like the Planet X 50mm Carbon rim sells (debadged) in a 16 hole and a 20 hole Gigantex rear might even be stiff enough for a lighter rider.

http://www.planet-x-bikes.co.uk/i/q/RIPX50C/planet_x_50mm_carbon_rim

Re: DA 7850 rebuild - 16H rim recommendations

Posted: Sun Dec 23, 2012 12:08 pm
by tigoose
To the op
What did you end up getting as i'm wanting to do the same with rs80 hubs?

Re: DA 7850 rebuild - 16H rim recommendations

Posted: Sun Dec 23, 2012 12:08 pm
by Weenie

Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



Re: DA 7850 rebuild - 16H rim recommendations

Posted: Sun Dec 23, 2012 12:32 pm
by lechat
There's nice looking a set of Xero XR1s on eBay for $140 shipped. They use Kinlin XR300s in 16/20.