Mavic exalith coating and tubular glue

Discuss light weight issues concerning road bikes & parts.
Post Reply
gb103
Posts: 71
Joined: Sun Jun 12, 2011 8:07 pm

by gb103

Hi, does anybody know how easy it is to remove tubular glue off the exalith brake track. I use white spirits on carbon rims, but will this be detrimental to the exalith coating.

Thanks

User avatar
monty dog
Posts: 127
Joined: Mon Jan 26, 2004 7:48 pm

by monty dog

I once had a chat to the guys that own the company that do the coating process - it is at a molecular level within the metallic structure so should not be affected by any solvents
Just ride

by Weenie


fdegrove
Tubbie Guru
Posts: 5851
Joined: Tue May 03, 2005 2:20 am
Location: Belgium

by fdegrove

Hi,

Exactly.

Ciao, ;)
Being a snob is an expensive hobby.

Geoff
Posts: 5015
Joined: Sat Dec 13, 2003 2:25 am
Location: Canada

by Geoff

It can't be any different than a hard-anodized rim of old...

User avatar
elviento
Posts: 1235
Joined: Thu Aug 25, 2005 7:09 pm
Location: In the industry
Contact:

by elviento

This apparently is a very tough coating, and should not be affected.

It uses a very high temperature (1500 degrees? Not sure of exact number), and can achieve deep penetration into the aluminum.
Fast falcons: http://www.youtube.com/watch?v=j3mTPEuFcWk" onclick="window.open(this.href);return false;
www.falcobike.com
Facebook: falcobikeglobal

konky
Posts: 839
Joined: Mon Dec 14, 2009 6:26 pm

by konky

A drop of petrol/gasoline is best for getting rim glue off brake tracks and I doubt it would trouble the exalith coating. Alcohol doesn't really do the job.

by Weenie


Post Reply
  • Similar Topics
    Replies
    Views
    Last post