Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About
It is currently Tue May 24, 2016 9:00 am
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED

If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062


All times are UTC+01:00





Post new topic  Reply to topic  [ 13 posts ] 
Author Message
PostPosted: Sun Nov 11, 2012 5:51 pm 
Offline

Joined: Sat Dec 04, 2010 4:19 am
Posts: 51
I've been meaning to post this topic for awhile but am finally getting around to it. I have a 58cm SystemSix (in the beautiful silver/black colorscheme) and for awhile I was running some HED C2 rims laced to BHS hubs. With these wide rims, my 23mm GP4000s were measuring out closer to 26mm which was awesome and gave a great ride BUT there was literally a mm tops between the tire and Sram Red (silver) brakes and road debris was getting caught between them. Who knows what would've happened if my wheel went out of true or I broke a spoke! I've tried to search WW and all over the internet in general and essentially have 2 questions.

Do the Sram brakes have especially little clearance and are there brakes that would have greater clearance or is this a Cannondale geometry issue? I've read about Shimano brakes having a little more clearance but I wouldn't be able to run them due to clearance issues.

And my second question for anyone that has run a SystemSix, what were the largest tires you could fit in your frame? I love the stiffness of it but this has me discouraged and thinking about getting a new frame if I'm stuck to running 23 or barely fitting 25's on a standard width rim. Thanks guys for the help!


Top
   
PostPosted: Sun Nov 11, 2012 10:06 pm 
Offline

Joined: Sun Mar 27, 2011 8:16 pm
Posts: 437
I'm interested in this also- I was looking at some Hed Stinger 9's, but I chickened out due to the width.

Image

(I've cleaned the bike since I took this photo)


Top
   
PostPosted: Sun Nov 11, 2012 11:53 pm 
Offline

Joined: Sat Feb 07, 2009 5:52 am
Posts: 401
I am very tight on clearance on the rear brake bridge, it is not a caliper issue. My frame will not take a 25 mm tire on a narrow mavic rim.


Top
   
PostPosted: Mon Nov 12, 2012 3:57 am 
Offline

Joined: Mon Jun 14, 2010 2:32 am
Posts: 94
I'm running a 56cm and I can fit a 23mm tire.. anything more i have issues with seattube, tire clearance... very short stays on my frame


Top
   
PostPosted: Mon Nov 12, 2012 1:31 pm 
Offline
User avatar

Joined: Fri Dec 11, 2009 10:38 pm
Posts: 1535
Location: Welland, Ontario
Since the System uses a CAAD 9 rear triangle which I believe has had consistent geometry, and I have a CAAD 5, I can tell you that I tried a 28mm tire on it with no problem. Lots of clearance with Campy brakes. I think it's your brakes causing the problem.

Unless I'm wrong about the geometry of course in which case this is no help.

edit: went to check and from what I can tell from the geo charts and my CAAD there is no difference up to the present.

_________________
There's sometimes a buggy.
How many drivers does a buggy have?

One.

So let's just say I'm drivin' this buggy...
and if you fix your attitude you can ride along with me.

http://www.youtube.com/watch?v=GekiIMh4ZkM


Top
   
PostPosted: Mon Nov 12, 2012 7:25 pm 
Offline

Joined: Fri Feb 15, 2008 6:02 am
Posts: 5
Location: Seattle
I run 25mm GP 4000s on HED C2 rims (Ardennes) on my System Six with no problems. I have DA 7800 brakes. Hope this helps.


Top
   
PostPosted: Mon Nov 12, 2012 8:50 pm 
Offline

Joined: Sun Mar 27, 2011 8:16 pm
Posts: 437
My concern is that the HED Stinger 9 is ~28mm wide, and the distance between the stays is just under 38mm, is ~5mm per side enough, or will I end up with the rim rubbing on the chainstays under heavy load?

My current 808 doesn't, but it's pre-Firecrest, so a lot narrower.


Top
   
PostPosted: Mon Nov 12, 2012 10:01 pm 
Offline

Joined: Sat Feb 07, 2009 5:52 am
Posts: 401
poster's question relates to the height of the brake bridge on the seat stays. Given that the System Six has a fabricated rear end, it is possible to have variations in the location of the brake bridge in relation to the drop out. As I noted, on my size 60, the brake bridge will rub a 25 mm tire. Perhaps a change to a different caliper would help marginally, but on my DA 7800, center bolt is awfully close to the tread of a 23mm tire.


Top
   
PostPosted: Mon Nov 12, 2012 10:49 pm 
Offline
User avatar

Joined: Fri Dec 11, 2009 10:38 pm
Posts: 1535
Location: Welland, Ontario
spud wrote:
poster's question relates to the height of the brake bridge on the seat stays. Given that the System Six has a fabricated rear end, it is possible to have variations in the location of the brake bridge in relation to the drop out. As I noted, on my size 60, the brake bridge will rub a 25 mm tire. Perhaps a change to a different caliper would help marginally, but on my DA 7800, center bolt is awfully close to the tread of a 23mm tire.


I'm surprised that Cannondale would have this much variation - but obviously they do. My CAAD has more than 5mm clearance to the seatstay and bridge, and 4mm with the brake installed. Also 4mm to the FD clamp on the seat tube.

All pictures with a 28mm Conti Gatorskin.

Image

Image

Image

Image

_________________
There's sometimes a buggy.
How many drivers does a buggy have?

One.

So let's just say I'm drivin' this buggy...
and if you fix your attitude you can ride along with me.

http://www.youtube.com/watch?v=GekiIMh4ZkM


Top
   
PostPosted: Mon Nov 12, 2012 11:01 pm 
Offline

Joined: Sun Mar 27, 2011 8:16 pm
Posts: 437
25c Gatorskin, ~5mm clearance to the brake bridge:

Image


Top
   
PostPosted: Mon Dec 03, 2012 6:28 am 
Offline

Joined: Sat Dec 04, 2010 4:19 am
Posts: 51
Thank you everyone for sharing your experiences. I just don't think this is the right frame for my purposes so it's up for sale in the classifieds


Top
   
PostPosted: Mon Dec 03, 2012 6:56 am 
Offline

Joined: Wed Oct 06, 2010 3:38 am
Posts: 92
gpeterson63 wrote:
Thank you everyone for sharing your experiences. I just don't think this is the right frame for my purposes so it's up for sale in the classifieds


i've seen this bike in person--it's in fantastic shape. someone's going to get a really great deal!


Top
   
PostPosted: Mon Dec 03, 2012 11:57 pm 
Offline
User avatar

Joined: Fri Dec 11, 2009 10:38 pm
Posts: 1535
Location: Welland, Ontario
gpeterson63 wrote:
Thank you everyone for sharing your experiences. I just don't think this is the right frame for my purposes so it's up for sale in the classifieds


where?

_________________
There's sometimes a buggy.
How many drivers does a buggy have?

One.

So let's just say I'm drivin' this buggy...
and if you fix your attitude you can ride along with me.

http://www.youtube.com/watch?v=GekiIMh4ZkM


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 13 posts ] 

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. ee cycleworks brake issues

[ Go to page: 1 2 ]

in Road

Lafolie

21

1975

Sun Oct 25, 2015 10:06 pm

BeeSeeBee View the latest post

There are no new unread posts for this topic. Colnago C60 tire clearance

in Road

Faapaa

6

711

Wed Oct 21, 2015 3:40 pm

Faapaa View the latest post

There are no new unread posts for this topic. Canyon Ultimate AL tire clearance

in Road

Roel W

0

394

Mon Aug 10, 2015 8:54 pm

Roel W View the latest post

There are no new unread posts for this topic. Minimum Tire to Chainstay Clearance

in Road

fogman

6

1076

Fri Jun 05, 2015 7:51 pm

Valbrona View the latest post

There are no new unread posts for this topic. Tarmac SL4 with SRM - Frame Clearance for cadence magnet

in Road

micahb

2

393

Sun Oct 04, 2015 3:50 am

tetonroller View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: Bing [Bot], Exabot [Bot], Google [Bot], psychoboy21, Yahoo [Bot] and 17 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited