2012 SRAM Red Crank on Cannondale EVO - Chainline question
Posted: Sun Nov 11, 2012 5:18 pm
Just replaced my old compact red crank with the new compact 2012 version on my EVO, and the crank seems further outboard. Wondering if anyone else has installed the new red crank on an Evo and can confirm what bearing spacers they used. Chain is a new cleaned and dumonde tech lubed sram 1091, cassette is new SRAM red 2012 too (fwiw).
The old red crankset was installed with the SRAM pressfit 30 spacers, and worked great, so I installed the new one with the included pressfit 30 spacers and followed instructions exactly. The preload collar worked to snug everything up, and the fit seems great until the chain goes on. The main thing I noticed is that the chain makes a noise as it settles onto the inner chainring when in 1st and 2nd gear (it is not lined up well enough to slip onto the teeth without the chainring moving the chain laterally first). I made sure the chain wasn't hitting the FD cage or chaincatcher, so it seems like the drive side is a few mm further out than the old crank. I have the original bearing spacers that came with the frameset (intended for the sisl?) that are thinner, and am thinking about trying those instead of the SRAM PF30 ones, but before I start experiments, I thought i'd check with the hive mind here.
The old red crankset was installed with the SRAM pressfit 30 spacers, and worked great, so I installed the new one with the included pressfit 30 spacers and followed instructions exactly. The preload collar worked to snug everything up, and the fit seems great until the chain goes on. The main thing I noticed is that the chain makes a noise as it settles onto the inner chainring when in 1st and 2nd gear (it is not lined up well enough to slip onto the teeth without the chainring moving the chain laterally first). I made sure the chain wasn't hitting the FD cage or chaincatcher, so it seems like the drive side is a few mm further out than the old crank. I have the original bearing spacers that came with the frameset (intended for the sisl?) that are thinner, and am thinking about trying those instead of the SRAM PF30 ones, but before I start experiments, I thought i'd check with the hive mind here.