Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About
It is currently Thu May 05, 2016 9:21 pm
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED

If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062


All times are UTC+01:00





Post new topic  Reply to topic  [ 10 posts ] 
Author Message
PostPosted: Wed Sep 24, 2014 8:52 pm 
Offline

Joined: Sat Sep 20, 2014 12:24 pm
Posts: 14
Hello

I´m looking for a durable, light, and cheep adapter for BB386 to Shimano´s press fit bottom bracket. I´m going to use a Rotor 3D24 crank (uses standard Shimano BB) on the frame.


Top
   
PostPosted: Wed Sep 24, 2014 9:56 pm 
Offline

Joined: Thu Sep 04, 2014 12:23 pm
Posts: 489
You need to be more specific about which bottom bracket you have. Shimano's PF bracket you mention does not fit BB386...its 41mm OD, not 46mm OD.
BB386 is basically a wide BB shell version of PF30 which is a 46mm ID shell.
To adapt a 24mm OD crank to PF30 bearings, Wheel Mfg sells adapters to accommodate a 24mm OD crank like Rotor and DA.

http://wheelsmfg.com/386evo-adapter-for ... ranks.html


Top
   
PostPosted: Thu Sep 25, 2014 12:52 pm 
Offline

Joined: Thu Sep 25, 2014 12:35 pm
Posts: 2
Guys, I have this on my Cannondale EVO and works seamlessly. You may need to be careful not to over-tighten your crankarm nut so as not to cause any rubbing. Once installed your Shimano cranksets will run beautifully.


Top
   
PostPosted: Thu Sep 25, 2014 12:58 pm 
Offline

Joined: Tue Sep 20, 2011 12:54 pm
Posts: 395
Location: Haines, AK - Temporarily
You're running the BB386 conversion cups in your PF30 EVO?


Top
   
PostPosted: Thu Sep 25, 2014 1:56 pm 
Offline

Joined: Thu Sep 04, 2014 12:23 pm
Posts: 489
jiefrew wrote:
Guys, I have this on my Cannondale EVO and works seamlessly. You may need to be careful not to over-tighten your crankarm nut so as not to cause any rubbing. Once installed your Shimano cranksets will run beautifully.

Crankarm nut? Sorry but what you write isn't even relevant. Over tighten? What torque? What crank?


Top
   
PostPosted: Thu Sep 25, 2014 8:05 pm 
Offline
User avatar

Joined: Sat Jun 12, 2004 8:49 am
Posts: 2180
Location: Denmark
The Rotor 4624 Evo BB is a good bet. And it doesn't creak ;-)


Top
   
PostPosted: Thu Sep 25, 2014 10:16 pm 
Offline
User avatar

Joined: Mon Jul 07, 2014 8:15 am
Posts: 1069
Location: NorthEU
Yes, like Mario says, Rotor 4624. It is not light at 144g weighted. You also got the Praxis version which is not bad at all. Had that on my previous frame.
Rotor works great and Praxis did to.

_________________
Bikes:

Ax Lightness Vial EVO D
Paduano Racing Fidia
Open *UP*
https://opencycle.com/showcase/xplr3r-1-by-rickard


Top
   
PostPosted: Thu Sep 25, 2014 10:50 pm 
Offline

Joined: Thu Sep 04, 2014 12:23 pm
Posts: 489
Yes, Rotor and Praxis 24mm ID BB's works fine with BBright. But so does stock BBright 30mm ID BB with Wheel Mfg spacers.
FWIW, Cervelo spec's Loctite for BBright which many don't use. That is why they squeak...not because of using spacers on a Rotor or DA 24mm spindle OD.


Top
   
PostPosted: Fri Sep 26, 2014 3:24 pm 
Offline
User avatar

Joined: Mon Jul 07, 2014 8:15 am
Posts: 1069
Location: NorthEU
Did i miss something?
Who says it is BB right?
I don't use that, i talk of PF30 BB's and frames.
For that application, Both Rotor and Praxis works great.
No issues at all.

_________________
Bikes:

Ax Lightness Vial EVO D
Paduano Racing Fidia
Open *UP*
https://opencycle.com/showcase/xplr3r-1-by-rickard


Top
   
PostPosted: Fri Sep 26, 2014 4:06 pm 
Offline

Joined: Thu Sep 04, 2014 12:23 pm
Posts: 489
Sorry wheelsONfire...I made a false reference to BBright but my message stands. There is nothing really special about Rotor or even Praxis BB's for BB386 is the point. Yes they work fine as you say. Ten's of thousands of wheel mfg spacer sets out there including supplied from major bike companies to convert PF30....BB386 is simply a wide shell PF30.....to 24mm spindle cranks.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 10 posts ] 

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. CAAD10 Advice BB30/BB386 crank

in Road

Aaronskibeat

8

621

Mon Jan 18, 2016 8:30 pm

bikerjulio View the latest post

There are no new unread posts for this topic. Dura-ace WH-9000 C24 CL vs TL

[ Go to page: 1 2 ]

in Road

Gajdzin

20

2713

Mon Apr 11, 2016 6:59 pm

Briscoelab View the latest post

There are no new unread posts for this topic. Dura Ace 9000 next update?

[ Go to page: 1 2 3 ]

in Road

itguy

44

6306

Wed Sep 02, 2015 2:14 pm

HTML View the latest post

There are no new unread posts for this topic. Which cables for Dura Ace 9000

[ Go to page: 1 2 ]

in Road

Flint

21

1913

Mon Apr 04, 2016 12:33 pm

Wookski View the latest post

There are no new unread posts for this topic. Dura Ace 9000 pulleys

in Road

oreoboreo

4

968

Tue Jun 09, 2015 8:44 pm

oreoboreo View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: 4ibanez, Baidu [Spider], CBJ, defride, Ekorre, Enda Marron, Yahoo [Bot] and 43 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited