Stan's tube sealant

Back by popular demand, the general all-things Road forum!

Moderator: robbosmans

Forum rules
Post Reply
sungerdds
Posts: 57
Joined: Mon Jan 03, 2005 4:56 am

by sungerdds on Thu Oct 18, 2012 10:34 pm

Will Stan's (or anyone's else) tube sealant help prevent flats in a polyurethane inner tube (Panaracer greenlite)? Also approximately how many grams does a one time application add, and how frequently should it be reapplied?
Top

by Weenie on Thu Oct 18, 2012 10:34 pm


Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com


Top
User avatar
kaaos
Posts: 37
Joined: Tue May 24, 2011 5:34 am
Location: Melbourne, Australia

by kaaos on Thu Oct 18, 2012 11:31 pm

not familiar with that tire...

You'll need approximately 15ml per tyre (wide tyres may need little bit more).
One application will last between 3 to 6 months, depending on temperature.
Top
hillrider
Posts: 67
Joined: Wed Oct 13, 2010 7:20 pm
Location: Ireland

by hillrider on Fri Oct 19, 2012 1:40 am

Stans recommends 59ml for a mtb tire,so based on that I add 40ml of the sealant to my 23c tube.
Top
User avatar
Getter
Posts: 848
Joined: Sat Nov 14, 2009 6:30 am
Location: So Cal

by Getter on Fri Oct 19, 2012 2:46 am

I use about 30ml for my 23c tube. Its worked for me in standard and latex tubes.

Depending on the size of the puncture...alot can spray out of the tube. Keep rolling till it seals.
Top
Post Reply

Return to “Road”