Stan's tube sealant

Discuss light weight issues concerning road bikes & parts.
Post Reply
sungerdds
Posts: 57
Joined: Mon Jan 03, 2005 4:56 am

by sungerdds

Will Stan's (or anyone's else) tube sealant help prevent flats in a polyurethane inner tube (Panaracer greenlite)? Also approximately how many grams does a one time application add, and how frequently should it be reapplied?

User avatar
kaaos
Posts: 37
Joined: Tue May 24, 2011 5:34 am
Location: Melbourne, Australia

by kaaos

not familiar with that tire...

You'll need approximately 15ml per tyre (wide tyres may need little bit more).
One application will last between 3 to 6 months, depending on temperature.

by Weenie


hillrider
Posts: 67
Joined: Wed Oct 13, 2010 7:20 pm
Location: Ireland

by hillrider

Stans recommends 59ml for a mtb tire,so based on that I add 40ml of the sealant to my 23c tube.

User avatar
Getter
Posts: 877
Joined: Sat Nov 14, 2009 6:30 am
Location: So Cal

by Getter

I use about 30ml for my 23c tube. Its worked for me in standard and latex tubes.

Depending on the size of the puncture...alot can spray out of the tube. Keep rolling till it seals.

Post Reply
  • Similar Topics
    Replies
    Views
    Last post