Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About
It is currently Wed Jun 29, 2016 2:17 pm
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED
- Avatars cannot be uploaded ✔ FIXED

Please note that we will soon do some changes in WW board template design in case to get a fully mobile/desktop responsiveness board!
If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062


All times are UTC+01:00





Post new topic  Reply to topic  [ 6 posts ] 
Author Message
PostPosted: Fri Oct 05, 2012 3:23 pm 
Offline

Joined: Sun Nov 29, 2009 7:39 pm
Posts: 131
hi everybody
the last couple of days i have had a problem using my Di2..
when i shift from the 21 to the 23 cog(11/23 cassete) the rear derailleur after few seconds move down again to the 21cog. That happend with either the big or small chainring.Everything else works fine
Any ideas?


Top
   
PostPosted: Fri Oct 05, 2012 4:17 pm 
Offline

Joined: Sun Sep 27, 2009 9:54 am
Posts: 359
Location: Australia
does it stay in 23 when the wheel is off?

_________________
2012 Scott Foil Premium


Top
   
PostPosted: Fri Oct 05, 2012 4:29 pm 
Offline

Joined: Thu Jan 05, 2012 1:26 am
Posts: 81
Have you checked it in the stand to see if the motor in the derailleur is actually moving back to the 21 spot? If it is, then you have some kind of programming error, which you will have to solve by contacting your LBS Di2 expert or Shimano. Otherwise, it may be a problem that is normal for all derailleurs (electronic or not.) It could be that your LOW limit screw is slightly too tight, and therefore the derailleur stays in between the 2 cogs and therefore and your chain moves down when you encounter a bump or something that makes it move a little bit.

This problem is especially relevant with Di2 because the motor actually shifts slightly past the point it is programmed as the center of the cog. There are 30 clicks in a Di2 brain, every shift it should move 3 for a 10 speed cassette. However, it moves 4 clicks to ensure that the chain moves to the next cog, and then shifts back one, to keep it centered on the cog.

Therefore, your limit screws may be out of adjustment, or you "electronic cable tension" may be off (this means that you need to calibrate where the "center of the cogs" is in the Di2 brain.) I would recommend checking your limit screw first, because it is a much easier adjustment, and involves no monkeying with electronics.

I hope that was clear

GOOD LUCK!

_________________
My Bike:
viewtopic.php?f=10&t=110318" onclick="window.open(this.href);return false;


Top
   
PostPosted: Fri Oct 05, 2012 4:50 pm 
Offline

Joined: Wed Feb 09, 2005 4:51 am
Posts: 1844
Yes as pointed out. Likely the limit screw. Release it that wee little bit such that the chain will remain in place after shifting.

It even happens on mechanical sets!!

Also, do follow the tuning and setup instructions word for word. It usually will sort out little issues with shifting due to its unique nature as many do not follow them and use the traditional mechanical setup methods and minor problems arise as a result.


Top
   
PostPosted: Fri Oct 05, 2012 4:54 pm 
Offline

Joined: Sun Nov 29, 2009 7:39 pm
Posts: 131
when the bike is in the stand with the wheeloff it return again down to the 21 indeed


Top
   
PostPosted: Fri Oct 05, 2012 6:44 pm 
Offline

Joined: Sun Nov 29, 2009 7:39 pm
Posts: 131
problem solved
The low was to tight !!!
thanks a lot guys


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 6 posts ] 

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. p2 problem

in Road

goldielox

0

210

Sun Oct 04, 2015 1:31 am

goldielox View the latest post

There are no new unread posts for this topic. Red 22 problem?

in Road

logy

10

1017

Sat Jul 25, 2015 8:16 pm

logy View the latest post

There are no new unread posts for this topic. Sram Force 1 problem

in Road

cerro

4

543

Thu Apr 21, 2016 7:31 am

djcharlou View the latest post

There are no new unread posts for this topic. Campagnolo EPS shifting problem

in Road

Martin.F

3

493

Sun Sep 06, 2015 7:51 pm

XCProMD View the latest post

There are no new unread posts for this topic. Missing Link 11 Problem

[ Go to page: 1 2 ]

in Road

Bridgeman

18

930

Sun Feb 14, 2016 9:11 pm

Calnago View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: 2lo8, istigatrice, Martin.dk, rbrtwyn, reedplayer and 19 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited