Overall Ultegra Di2 6770 topic

Back by popular demand, the general all-things Road forum!

Moderator: robbosmans

User avatar
shoopdawoop
Posts: 434
Joined: Thu Dec 22, 2011 12:37 am

by shoopdawoop

the claim is all you need is new rear derailleur and cassette; and you might need to update the firmware/get a new front junction box and cables.

so 2x300-350mm cables
3 or 5 port front junction
DA Rear D
11 speed cassette and compatible free hub

pataww2001
Posts: 10
Joined: Fri Sep 27, 2013 11:41 am

by pataww2001

53x12 wrote:Pat, which junction box A do you have?

If you have the newer SM-EW90 A all you need is the associated battery charger, SM-BCR2.

If you have the older SM-EW67A-E you will need the SM-PCE1 PC interface.

If I am wrong, someone can correct me on that.


I'll have to check this out and see.

by Weenie


Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



pataww2001
Posts: 10
Joined: Fri Sep 27, 2013 11:41 am

by pataww2001

shoopdawoop wrote:the claim is all you need is new rear derailleur and cassette; and you might need to update the firmware/get a new front junction box and cables.

so 2x300-350mm cables
3 or 5 port front junction
DA Rear D
11 speed cassette and compatible free hub



Pardon my lack of knowledge on this.... does the new junction box not just replace the old one? why new cables needed?

VPR
Posts: 44
Joined: Sun Mar 24, 2013 3:51 pm
Location: Espoo, Finland

by VPR

The old junction box had fixed cables, the new box is fully modular.

mfrassica
Posts: 5
Joined: Thu Sep 26, 2013 7:01 pm

by mfrassica

Omiar wrote:
thisisatest wrote:The number of speeds the system will shift for, and the distance that it will move per shift, is controlled at the rear derailleur.
In other words:
6770 can shift 11speed, if you use a 9070 rear derailleur. 9070 can shift 10speed, if you use a 6770 rear derailleur.
This is how the Shimano guys at interbike explained it on more than one occasion.


Excellent information :thumbup:

SpoonMan wrote:Working with very small electric motors (amongst other things), I assume that means the motors are not 'stepping' motors, but infinitely variable - otherwise you couldn't have a 10-step motor run 11 cogs


Well, along with the 9 (10spd) or 10 (11spd) steps for gear change, they also have 15 steps inward and 15 steps outward from the initial position.


I thought a stepper motor was configured such that 'X' number of steps were assigned to Rad or 360 degrees, not equated to the output of a linkage system (ex. the derailleur). Meaning the stepper motors are fabricated such that there could very well be 500 steps (the ones I've used had over 2000) per 360 degrees of rotation. So to when programming how many steps would equate from one cog to another would be something like 1500 or 2000 steps, depending on if there is a gear box, or other mechanical advantage linkage (i.e. RD).

If this was the case, someone could easily reprogram the # of steps to go from 10 to 11 cassette. Someone tell me if I am way off on this. FYI, I still use cable shifting. The Di2 is still voodoo to me.

pataww2001
Posts: 10
Joined: Fri Sep 27, 2013 11:41 am

by pataww2001

shoopdawoop wrote:the claim is all you need is new rear derailleur and cassette; and you might need to update the firmware/get a new front junction box and cables.

so 2x300-350mm cables
3 or 5 port front junction
DA Rear D
11 speed cassette and compatible free hub


I'm a little confused.... i was under the impression that I didn't have to change the junction box, just get the SM-PCE1 for the Etube ability and update. and then change the rear Der, and cogset.....

Pat

415brian
Posts: 52
Joined: Fri Sep 30, 2011 4:48 pm

by 415brian

In a recent crash, I bent my RD-6770 derailleur plates (in addition to my frame's derailleur hanger). If RD-6770 and RD-6700 parts are the same, it looks like plates are Shimano parts Y5X998030 (outer plate) & Y5X908100 (inner plate) (Tech doc PDF: http://goo.gl/0QH4t2).

I was running short cage plates ("SS"), but I'd also be open to running medium cage plates ("GS").

Does anyone know where I can buy replacement parts? If this wasn't Di2, I'd probably just buy a new derailleur.

lotushiast
Posts: 36
Joined: Fri Mar 03, 2006 11:43 pm

by lotushiast

Hello,

is it possible to use the newer RD 6870 and FD 6870 with the 6770 Sti's and still 10 Speed?

Regards Harald.

User avatar
53x12
Posts: 3708
Joined: Fri Sep 15, 2006 6:02 am
Location: On the bike

by 53x12

pataww2001 wrote:
shoopdawoop wrote:the claim is all you need is new rear derailleur and cassette; and you might need to update the firmware/get a new front junction box and cables.

so 2x300-350mm cables
3 or 5 port front junction
DA Rear D
11 speed cassette and compatible free hub


I'm a little confused.... i was under the impression that I didn't have to change the junction box, just get the SM-PCE1 for the Etube ability and update. and then change the rear Der, and cogset.....

Pat


You don't need to change junction box if running 6770 since it uses the same wire as 6870/9070. Only change junction box if you want to run Shimano internal battery mod.
"Marginal gains are the only gains when all that's left to gain is in the margins."

User avatar
53x12
Posts: 3708
Joined: Fri Sep 15, 2006 6:02 am
Location: On the bike

by 53x12

lotushiast wrote:Hello,

is it possible to use the newer RD 6870 and FD 6870 with the 6770 Sti's and still 10 Speed?

Regards Harald.


Harald, no I don't believe so as RD controls if it is 10 or 11 speed. I don't want to say never ever as I'm sure someone will be able to find some hack.
"Marginal gains are the only gains when all that's left to gain is in the margins."

pataww2001
Posts: 10
Joined: Fri Sep 27, 2013 11:41 am

by pataww2001

53x12 wrote:
pataww2001 wrote:
shoopdawoop wrote:the claim is all you need is new rear derailleur and cassette; and you might need to update the firmware/get a new front junction box and cables.

so 2x300-350mm cables
3 or 5 port front junction
DA Rear D
11 speed cassette and compatible free hub


I'm a little confused.... i was under the impression that I didn't have to change the junction box, just get the SM-PCE1 for the Etube ability and update. and then change the rear Der, and cogset.....

Pat


You don't need to change junction box if running 6770 since it uses the same wire as 6870/9070. Only change junction box if you want to run Shimano internal battery mod.


Great so it looks like in total I'll need, 11 speed derailleurs, 11 speed cassette and update. is anyone have a solid answer on whether both derailleurs are needed? or just the rear unit

Pat

dha
Posts: 163
Joined: Tue Jun 12, 2012 4:40 pm

by dha

shimano say you need both, but then again they would.

User avatar
53x12
Posts: 3708
Joined: Fri Sep 15, 2006 6:02 am
Location: On the bike

by 53x12

I'm not sure I have read anyone using 6770 shifters and tried 6870/9070 RD/FD yet. Hopefully in the upcoming months we will hear more about that. But speculation was that you only needed the RD as this was the 'brains' for whether it is 10 or 11 speed.
"Marginal gains are the only gains when all that's left to gain is in the margins."

415brian
Posts: 52
Joined: Fri Sep 30, 2011 4:48 pm

by 415brian

I can confirm this use case: FD-6770 + RD-9070 will work as 11-speed (on an otherwise 9070 time trial setup).

One observation: an FD-6770 auto-trims differently vs. an FD-9070. My notes (and video) below, where largest cog = 1 and smallest cog = 11. I'm highlighting when the trim events occurs, e.g. "7-to-6"....

Ultegra 10-speed FD (FD-6770) & Dura-Ace 11-speed RD (RD-9070): http://www.youtube.com/watch?v=v1vewETe1q0

Front chainring: small
Up: 7-to-6 & 4-to-3
Down: 5-to-6 & 7-to-8

Front chainring: big
Up: 7-to-6 & 5-to-4
Down: 5-to-6, 8-to-9

Dura-Ace 11 speed FD (FD-9070) & Dura-Ace 11-speed RD (RD-9070): http://www.youtube.com/watch?v=BM388hQSeyE

Front chainring: small
Up: 8-to-7 & 5-to-4
Down: 5-to-6 & 8-to-9

Front chainring: big
Up: 9-to-8, 6-to-5
Down: 6-to-7, 9-to-10

Image

by Weenie


Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



RichieE46
Posts: 45
Joined: Sun Aug 18, 2013 4:54 am

by RichieE46

Thanks 415brian! Very good info

Good to know that I can just upgrade the RD and cassette first...At least I can upgrade to 9070 slowly! :)

Post Reply