Tightening Look KEO's

Discuss light weight issues concerning road bikes & parts.
Post Reply
crewdoglm
Posts: 10
Joined: Wed Sep 26, 2012 3:52 am

by crewdoglm

My cycling renaisance includes riding the track and I am using a Look KEO which I intend to tighten down to MAX release tension. I noticed that the little bolt continues to turn after many revolutions and I was expecting the thing to stop at some point. It does not appear to be broken whatsoever. Does the bolt just turn freely after max tension is reached? How many turns does it take to max it out?

simonanks69
Posts: 83
Joined: Mon Aug 15, 2011 10:41 am
Location: Melbourne, Australia

by simonanks69

You could buy a pair of look zero float cleats which could get ride of your problem. http://www.lookcycle.com/en/us/route/ca ... -grip.html
CARPE DIEM
Colnago C59 Italia GLBK
Up coming custom steel cyclocross :D

by Weenie


brearley
Posts: 354
Joined: Mon Aug 11, 2008 10:08 pm
Location: Hull

by brearley

There should be a click once max tension is reached the bolt will carry on turning but once the max tension is reached stop.

got2ride
Posts: 67
Joined: Tue Aug 19, 2008 8:36 pm

by got2ride

It does keep going after you reach max. There is also a little silver bar that moves down that visually shows you where the setting is (middle of the back of the cleat)

Post Reply