Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About Impressum
It is currently Sun Dec 11, 2016 9:29 am
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED
- Avatars cannot be uploaded ✔ FIXED

Please note that we will soon do some changes in WW board template design in case to get a fully mobile/desktop responsiveness board!
If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062


All times are UTC+01:00





Post new topic  Reply to topic  [ 2 posts ] 
Author Message
PostPosted: Tue Oct 02, 2012 9:28 am 
Offline

Joined: Wed Sep 26, 2012 7:34 pm
Posts: 6
Hello. I was wondering about the possibility of tuning my mavic CCU hubs to basically change freehub system to a Tune-like one, use bigger bearings and make a carbon 1 piece axle instead of the actual 2-piece one.

Any hints/opinions?

Thanks very much!


Top
   
Posted: Tue Oct 02, 2012 9:28 am 


Top
   
 
PostPosted: Wed Oct 03, 2012 3:14 pm 
Offline

Joined: Wed Mar 28, 2007 12:49 pm
Posts: 1596
Location: Near Horgen, Switzerland
Anything is possible if you have the Engineering talent / deep enough pockets. I don't see why it would not be possible to change things. But the question you have to ask is what you would gain, and whether it wouldn't be easier to buy some lightweights or commission lightweight to do a special hub for you. I see 3 options:

1) Easy
The bad side of the current hubs is that they are a bit heavy and use a bushing not a bearing. If you were to add the ebay bearing mods to a Mavic titanium freehub you would get a slightly nicer hub for something like $250. I don't think a carbon axle would be worthwhile because it loses a lot of the flexibility in return for no real gain.

2) Hard
Another possibility might be to machine out the hub a bitt to take a DT type ratchet and totally new internals and an aluminium freehub. But that would take a lot of skill, alongside a very large and expensive machining centre to fit the whole built up wheel in

3) Harder
I think the wheels are built by lacing up the carbon spoke flanges and then popping the hub in. If you worked out a way to de-bond or cut out the hub centre, you could add a custom hub. But if you could do that then you are 50% of the way to building your own wheels.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 2 posts ] 

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. SRAM eTAP Tuning?

in Road

ProfessorChaos

11

1381

Sun Nov 27, 2016 12:07 pm

ProfessorChaos View the latest post

There are no new unread posts for this topic. B T P Bike Tuning Parts

in Road

Luc

2

781

Sat Dec 12, 2015 4:37 pm

Luc View the latest post

There are no new unread posts for this topic. Best place to purchase Ti and Al hardware for tuning?

in Road

Sooperlite

7

911

Sat Sep 24, 2016 6:32 am

Rick View the latest post

There are no new unread posts for this topic. source for domed washer for m6 bolt (deda seatpost tuning)

in Road

pavel

5

410

Fri Jan 29, 2016 10:59 pm

Tenlegs View the latest post

There are no new unread posts for this topic. Just got some used Mavic SL's

in Road

zalle

5

737

Fri Nov 11, 2016 12:56 am

AJS914 View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: Baidu [Spider], Exabot [Bot], Google Adsense [Bot], taylorpetie, Yahoo [Bot], zazo and 14 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited