HOT: Active* forum members generally gain 5% discount at starbike.com store!
Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Articles FAQ Contact About




Post new topic Reply to topic  [ 6 posts ] 
Author Message
PostPosted: Fri Oct 05, 2012 3:23 pm 
Offline

Joined: Sun Nov 29, 2009 7:39 pm
Posts: 129
hi everybody
the last couple of days i have had a problem using my Di2..
when i shift from the 21 to the 23 cog(11/23 cassete) the rear derailleur after few seconds move down again to the 21cog. That happend with either the big or small chainring.Everything else works fine
Any ideas?


Top
 Profile  
 
Posted: Fri Oct 05, 2012 3:23 pm 


Top
  
 
PostPosted: Fri Oct 05, 2012 4:17 pm 
Offline

Joined: Sun Sep 27, 2009 9:54 am
Posts: 359
Location: Australia
does it stay in 23 when the wheel is off?

_________________
2012 Scott Foil Premium


Top
 Profile  
 
PostPosted: Fri Oct 05, 2012 4:29 pm 
Offline

Joined: Thu Jan 05, 2012 1:26 am
Posts: 80
Have you checked it in the stand to see if the motor in the derailleur is actually moving back to the 21 spot? If it is, then you have some kind of programming error, which you will have to solve by contacting your LBS Di2 expert or Shimano. Otherwise, it may be a problem that is normal for all derailleurs (electronic or not.) It could be that your LOW limit screw is slightly too tight, and therefore the derailleur stays in between the 2 cogs and therefore and your chain moves down when you encounter a bump or something that makes it move a little bit.

This problem is especially relevant with Di2 because the motor actually shifts slightly past the point it is programmed as the center of the cog. There are 30 clicks in a Di2 brain, every shift it should move 3 for a 10 speed cassette. However, it moves 4 clicks to ensure that the chain moves to the next cog, and then shifts back one, to keep it centered on the cog.

Therefore, your limit screws may be out of adjustment, or you "electronic cable tension" may be off (this means that you need to calibrate where the "center of the cogs" is in the Di2 brain.) I would recommend checking your limit screw first, because it is a much easier adjustment, and involves no monkeying with electronics.

I hope that was clear

GOOD LUCK!

_________________
My Bike:
viewtopic.php?f=10&t=110318" onclick="window.open(this.href);return false;


Top
 Profile  
 
PostPosted: Fri Oct 05, 2012 4:50 pm 
Offline

Joined: Wed Feb 09, 2005 4:51 am
Posts: 1690
Yes as pointed out. Likely the limit screw. Release it that wee little bit such that the chain will remain in place after shifting.

It even happens on mechanical sets!!

Also, do follow the tuning and setup instructions word for word. It usually will sort out little issues with shifting due to its unique nature as many do not follow them and use the traditional mechanical setup methods and minor problems arise as a result.


Top
 Profile  
 
PostPosted: Fri Oct 05, 2012 4:54 pm 
Offline

Joined: Sun Nov 29, 2009 7:39 pm
Posts: 129
when the bike is in the stand with the wheeloff it return again down to the 21 indeed


Top
 Profile  
 
Posted: Fri Oct 05, 2012 4:54 pm 


Top
  
 
PostPosted: Fri Oct 05, 2012 6:44 pm 
Offline

Joined: Sun Nov 29, 2009 7:39 pm
Posts: 129
problem solved
The low was to tight !!!
thanks a lot guys


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 


Who is online

Users browsing this forum: Baidu [Spider], BeeSeeBee, Google Adsense [Bot], Grannen, psychedelictortilla, SWijland, tuba and 44 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Di2 Cat eye wiring problem

in Road

yumseyo

4

249

Wed Aug 06, 2014 8:54 pm

yumseyo View the latest post

There are no new unread posts for this topic. Latex tube problem

in Road

russianbear

12

1011

Fri Jun 13, 2014 5:26 am

Johnny Rad View the latest post

There are no new unread posts for this topic. Mix n Match shifting problem

in Road

jekyll man

2

325

Thu May 08, 2014 7:08 pm

jekyll man View the latest post

There are no new unread posts for this topic. Charger problem - Campagnolo EPS.

in Road

Nejmann

8

697

Tue May 20, 2014 12:24 am

choctop View the latest post

There are no new unread posts for this topic. PowerTap problem/suggestions

[ Go to page: 1, 2 ]

in Road

dgasmd

19

2067

Mon Nov 18, 2013 12:28 am

eric View the latest post


It is currently Sat Aug 23, 2014 4:39 pm

All times are UTC + 1 hour




Advertising   –  FAQ   –  Contact   –  Convert   –  About

© Weight Weenies 2000-2013
hosted by starbike.com


How to get rid of these ads? Just register!


Powered by phpBB