Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About
It is currently Wed May 04, 2016 1:37 am
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED

If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062


All times are UTC+01:00





Post new topic  Reply to topic  [ 5 posts ] 
Author Message
PostPosted: Wed Sep 19, 2012 4:03 pm 
Offline

Joined: Thu Feb 19, 2004 9:58 am
Posts: 599
Hi all,

I've been riding the THM bb (non-ceramic) and crank set up for a bit now. I've recently removed the chain to check out the noise from the BB. I seem to remember that a similar noise was there when I initially installed the crankset, but I chalked that up to "new" bearings and thought it would wear in and the noise would be reduced. Standard english threaded version of THM's BB in a Look 586 frame, installed with proper torque, has not backed out. Clavicula crankset was installed as per THM's instructions. BB was not faced.

Here's a video of the bearing noise:
http://www.youtube.com/watch?v=DV5KlvRhXKQ&feature=plcp

You will have to turn up your sound to hear it properly.

My concern is that there is too much drag. What are your thoughts? Normal for THM bearings?

_________________
____o
_`\<,_
(*)/ (*)


Top
   
PostPosted: Wed Sep 19, 2012 4:43 pm 
Offline

Joined: Mon Sep 07, 2009 3:10 am
Posts: 394
When you install the crank you need to leave just enough play so that the bearings can spin freely. You basically tighten the crank until there is some resistance and then back off so there is no resistant. What you have here is not a problem with your BB but a problem with your crank.


Top
   
PostPosted: Wed Sep 19, 2012 4:53 pm 
Offline

Joined: Thu Feb 19, 2004 9:58 am
Posts: 599
Thanks for the reply but I'm not quite following what you are suggesting.
Where are you referring to the tightening?
The preload cap? The non-drive side pinch bolts?

_________________
____o
_`\<,_
(*)/ (*)


Top
   
PostPosted: Wed Sep 19, 2012 5:22 pm 
Offline

Joined: Sun Sep 27, 2009 9:54 am
Posts: 359
Location: Australia
Preload cap is too tight or your bearing isn't sitting in the BB perfectly.

If you back off the Preload cap and you get play in the crank it's probably because the aluminium bearing seats on the axle is worn. This is a common problem with the Clavicula.

_________________
2012 Scott Foil Premium


Top
   
PostPosted: Wed Sep 19, 2012 6:09 pm 
Offline

Joined: Mon Sep 07, 2009 3:10 am
Posts: 394
I was suggesting that your preload cap was too tight before you tightened the pinch bolts.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 5 posts ] 

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Giant TCR alu bearing races in bottom bracket

[ Go to page: 1 2 ]

in Road

jorisee01

24

758

Wed Dec 16, 2015 10:51 pm

jorisee01 View the latest post

There are no new unread posts for this topic. PF 30 Bottom Bracket advice please.

[ Go to page: 1 2 ]

in Road

Titanium22

18

1811

Thu Nov 12, 2015 2:06 pm

rpenmanparker View the latest post

There are no new unread posts for this topic. bottom bracket tool

in Road

goldielox

11

629

Sat Feb 13, 2016 3:38 pm

BRM View the latest post

There are no new unread posts for this topic. Which bottom bracket for Trek Domane?

in Road

Flint

3

458

Fri Jan 08, 2016 9:54 pm

Flint View the latest post

There are no new unread posts for this topic. Colnago C60 - Campagnolo bottom bracket

[ Go to page: 1 2 ]

in Road

wedgie

27

1157

Tue Mar 08, 2016 11:33 pm

Miller View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: Baidu [Spider], Bing [Bot], thencameyou and 31 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited