New weight weenie pedals on the market- Ultralite Sports
Moderator: robbosmans
Ok i do not love them that much any longer as the plastic on my left pedal broke today :p
I do not know why or if it is a common problem. Just wrote to the company and will see what happens. Luckyly the part is not to complicated and i´ll make my own so i can use my bike. But hope to get some new parts from Ultralite later on.
I do not know why or if it is a common problem. Just wrote to the company and will see what happens. Luckyly the part is not to complicated and i´ll make my own so i can use my bike. But hope to get some new parts from Ultralite later on.
- HammerTime2
- Posts: 5813
- Joined: Thu May 04, 2006 4:43 pm
- Location: Wherever there's a mountain beckoning to be climbed
Well, as a general rule, ultra light is not always ultra durable. All the more so for a weight-bearing part if the rider is heavy (for example, over 90 kg, as Fuchspk admits to be) and/or strong.
You want durable? Get Dura Ace.
You want durable? Get Dura Ace.
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
Yeah that is for sure for some ultra light parts, but not all of them are bad and can hold as long as DA and somebody has to test this to see how far you can go. Otherwise we all would cycle around with DA and there would not be any weighweenie or so
Of course i´m a bit heavy for the titanium pedals but the steel pedals from Ultralite use the same plastic part and they are ok for up to 300lbs - so there should not be that problem with this.
Of course i´m a bit heavy for the titanium pedals but the steel pedals from Ultralite use the same plastic part and they are ok for up to 300lbs - so there should not be that problem with this.
Fuchspk wrote:Ok i do not love them that much any longer as the plastic on my left pedal broke today :p
So... the plastic part (that your cleat attaches to) rotates on a metal shaft... and the in-board piece (with the spring inside) rubs against your cleat... or doe sit rotate along with the cleat?
At any rate that plastic part will wear pretty quickly if you get any dirt in there.
formerly rruff...
- carbon2329
- Posts: 753
- Joined: Thu Aug 21, 2008 1:13 am
- Location: Utah
I'd love to hear any more experiences people have had on these.
Fuchspk, Did Ultralight replace your broken piece and what did they say?
Fuchspk, Did Ultralight replace your broken piece and what did they say?
The slight performance gains from light weight parts that are cancelled out due to bushing drag don't make any sense to me. Part longevity is another topic.
Sorry for my late respons. No i never got an answer to my question about my broken pedal - which is kinda bad as it was still in the warranty time....
They now have these barrels on their shop and i would guess that some more people had the same problem like me?
Anyway i just ordered a pair of barrels and will see how long they will last.
They now have these barrels on their shop and i would guess that some more people had the same problem like me?
Anyway i just ordered a pair of barrels and will see how long they will last.
-
- Posts: 938
- Joined: Mon Jan 24, 2011 8:09 pm
Yeah, from the looks of their website, me thinks these people are a 1-2 man operation and just aren't capable/prepared to handle running a company. No response to basic support issue?
Next, as Bridgeman above points out, bushing bearings??? Not good. There is never any longevity with bushing configurations on parts like pedals, that have massive pressure and high "cycles" (repitition) put on them. As pedals, crank bearings, wheel bearings etc...all do. It requires steel/ceramic.
There is a reason major industrial companies that understand manufacturing with components as such, don't use a bushing if they want it to last.
Lastly, I don't need some suspect pedal when I'm hitting a sprint and pushing high wattage. Maybe OK for a climber who can't go over 500w ever.
Next, as Bridgeman above points out, bushing bearings??? Not good. There is never any longevity with bushing configurations on parts like pedals, that have massive pressure and high "cycles" (repitition) put on them. As pedals, crank bearings, wheel bearings etc...all do. It requires steel/ceramic.
There is a reason major industrial companies that understand manufacturing with components as such, don't use a bushing if they want it to last.
Lastly, I don't need some suspect pedal when I'm hitting a sprint and pushing high wattage. Maybe OK for a climber who can't go over 500w ever.
-
- Posts: 2026
- Joined: Fri Feb 17, 2006 6:22 am
- Location: Zion
HammerTime2 wrote:Well, as a general rule, ultra light is not always ultra durable. All the more so for a weight-bearing part if the rider is heavy (for example, over 90 kg, as Fuchspk admits to be) and/or strong.
As a general rule, yes I agree.
Fortunately, it isn't always true.
That's what makes this forum great - we sift through the detritus and marginal products to highlight the exemplary ones.
As a result of the shared opinions here, my WW roadie has been solid - and I suspect that I'm not alone for those who spend the time to read the reviews and follow brands / products here.
Zigmeister wrote:bushing bearings??? Not good. There is never any longevity with bushing configurations on parts like pedals, that have massive pressure and high "cycles" (repitition) put on them. As pedals, crank bearings, wheel bearings etc...all do. It requires steel/ceramic.
There is a reason major industrial companies that understand manufacturing with components as such, don't use a bushing if they want it to last.
Yet plain bearings are used in IC engines and all sorts of highly stressed equipment.
- Gearjunkie
- Posts: 877
- Joined: Tue Feb 19, 2008 5:17 am
- Location: NZ
FWIW the turcite bushings on my AeroLite pedals spin far more freely than my Look Keo, Crankbrothers Eggbeater or Ultegra pedals. And they have lasted a very long time, doing a lot of climbing under a mashing heavy rider. And have a lot less play too.
Cheers
GJ
Cheers
GJ
Very often with either a pressurised feed of oil to cool and lubricate, or all but submerged in oil. Or both.jooo wrote:Yet plain bearings are used in IC engines and all sorts of highly stressed equipment.
Might make your lightweight pedals a little less lightweight.