Page 1 of 7

cannondale sisl2 + new compression plug details

Posted: Sun Sep 09, 2012 2:40 am
by thisisatest
a coworker of mine just picked up a new supersix evo with the sisl2 cranks. as any mechanic would do, he started taking it all apart. here's what he found:

photo(2).JPG

photo.JPG

photo(4).JPG

photo(3).JPG


compression plug assembly is 14g complete, vs 50g for the old one. crank individual parts have not been weighed (yet).

cannondale sisl2 + new compression plug details

Posted: Sun Sep 09, 2012 2:40 am
by Weenie

Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



Re: cannondale sisl2 + new compression plug details

Posted: Sun Sep 09, 2012 3:44 am
by NWSAlpine
I like that plug design. Will have to pick one up on ebay.

Re: cannondale sisl2 + new compression plug details

Posted: Sun Sep 09, 2012 4:23 am
by timzcat
Interesting. Looks like they lightened the spindles.

The new expander is great, have to get one of those since I am running the stock expander since the extralite expander was a piece of crap.

Re: cannondale sisl2 + new compression plug details

Posted: Sun Sep 09, 2012 4:00 pm
by Ufgators
which parts are interchangeable with the old SI SL crank?

Re: cannondale sisl2 + new compression plug details

Posted: Sun Sep 09, 2012 9:18 pm
by ParisCarbon
Maybe its just me, but doesn't it look like the Black crank fixing bolt is larger in diameter than the green one??
If so, the black one which I assume is the SiSL2 would not fit the Hollowgram crank...
I was hoping this was the quick fix for my SRM dillema... I can only assume somehow the SiSl2 crank will not play nice with the SRM powermeter... would only make sense... nothing is backwards compatible these days.. grrrrrrrrrrrrrrrrrr

Re: cannondale sisl2 + new compression plug details

Posted: Sun Sep 09, 2012 10:00 pm
by thisisatest
Bolt is same diameter, same threads. 12point hole for the 10mm allen wrench lets them take six little slivers out. Bolt is overall shorter, but most of the part chopped off was tapered anyway. Steel washer is more substantial, shinier, slightly less easy to lose.
Spindle is 109mm, a 5mm gain. I am very, very happy about that, as cannondale was simply running their rings too close to the frame for a long time. Now their chainline is inline with road standards. Also plenty of clearance between lockring and pf30 cups, srm should be a drop-in part. Note there is no built-in shoulder anymore, both sides use a spacer. With that, the wavy washer moves to the non-drive side. Inner bore past the threads seems like it's larger, not measured. And, as shown before, holes drilled in the lobes of the splines.
I tested it, bolts are interchangeable, as are arms (onto the spindle).
NOTE- this is NOT the sisl2, but the forged hollow SI cranks, new for this year.
Pics to follow.

Re: cannondale sisl2 + new compression plug details

Posted: Mon Sep 10, 2012 7:34 am
by Stockie
Pics and weight on scale please ;)

Re: cannondale sisl2 + new compression plug details

Posted: Wed Sep 12, 2012 6:25 am
by thisisatest
here are some pics in no particular order:
14g compression plug assembly
imagejpeg_3_2.jpg


extra-hollow spindle
IMAG1232.jpg


spindle length (109mm)
IMAG1233 resized.jpg


sisl2 crankset weight (434g arms, spider, spider lockring, rings, ring bolts)
IMAG1239 resized.jpg

Re: cannondale sisl2 + new compression plug details

Posted: Wed Sep 12, 2012 5:16 pm
by Stockie
Do you also have the weight of the new lighter spindle?

Re: cannondale sisl2 + new compression plug details

Posted: Thu Sep 13, 2012 1:02 am
by Ufgators
when will new spindles and parts be available for sale?

Re: cannondale sisl2 + new compression plug details

Posted: Thu Sep 13, 2012 2:24 am
by thisisatest
parts and spindles will be available for sale.
Pariscarbon has one on order from his lbs, apparently it's a bit of a wait right now.
i do not have pics of the new spindle because... because im very forgetful. thats all i got.

Re: cannondale sisl2 + new compression plug details

Posted: Thu Sep 13, 2012 4:22 am
by timzcat
What size were the SiSL2 arms and that appears to be 130BCD spider and gears.

That means 110BCD should be even lighter and I am hoping you say they are 175 arms so that 172.5 are lighter. :shock:

Re: cannondale sisl2 + new compression plug details

Posted: Thu Sep 13, 2012 5:42 am
by ParisCarbon
I have the Spindle kit on order, was 60-90 days... in the meantime I have got the shoulder cut off my 104 spindle so I can use my 2010 SRM on my EVO now...
the 109mm spindle will offer a standard Q factor so I will be swapping out as soon as it becomes available..

Re: cannondale sisl2 + new compression plug details

Posted: Sat Sep 15, 2012 11:55 am
by Ufgators
Can you use New crank arms with old spindle? I lucked upon some new SI SL 2 arms on ebay but I can't get the new spindle ...

Re: cannondale sisl2 + new compression plug details

Posted: Sat Sep 15, 2012 11:55 am
by Weenie

Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



Re: cannondale sisl2 + new compression plug details

Posted: Sat Sep 15, 2012 8:53 pm
by Scarpa
Can you just put on arm on scale?
thanks