I had to order a headset for my Evo Ult. and it came with the new expander.
Therefore if you order KP203 from Cannondale it should include the new expander. My scale says 16g which is a huge improvement over the 50g old one.

Good to know. Thanks!

Anyone know if the expander is available separately yet?

_________________
Fear is healthy, panic can be deadly

I'll answer my own question: "Spring" according to the LBS' Cannondale rep...

_________________
Fear is healthy, panic can be deadly

This may be a daft question but can you run the new sisl 2 with the rotor bsa bb30 bb adaptor. I have a bsa threaded frame and I much prefer the sisl 2 to the rotor 3d +

_________________
Owl

Using the rotor BSA adaptor adds ~10mm per side so you would be moving the chainrings further away from the frame thus altering/pushing out the chairline.

_________________
Michael - The Anaerobic Threshold is neither...

... And you'd need a longer spindle to accommodate it. It will not work.

Thanks guys, not keen on rotor so thm m3 seems like the most. Sensible option for a stiff light compact crank

_________________
Owl

Even with the new SiSL2 spindle which is 109 mm versus 104 mm, since Hollowgram was designed around a 68 mm bottom bracket shell width, adding 10 mm on the drive side for the BSA cups, simply pushes a hollowgram crankset/chainrings 10 mm further out from the expected chainline.

_________________
Michael - The Anaerobic Threshold is neither...

Don't know about the SISL crank bolt weights but I have just got some replacement SI arms from Cannondale. Was about to use the original SI crank bolts until I bought a pair of the SISL2 bolts off the bay to match the black replacement arms. You can feel the weight difference in the bolts intantly when holding them plus the new bolts have a wider bolt hole and are hollow.

@shoemakerpom2010

According to Dr Cannondale the new bolts weigh 13g vs 14g for the old ones. Any chance you could weigh them?
I wanted to order black bolts anyway and will probably get the sisl2's.

Btw they are charging €249 for those butt ugly one piece chainrings. I think I'll go with Praxis works, thanks.

Edit: Removed quote

_________________

2011 Cannondale Flash F1
2010 Cannondale Caad9
2000 Cannondale Caad 4 aero
1999 Cannondale Caad1
???? Concorde SS

He has older, original bolts from the first SI cranks. That's why they aren't hollow and use a smaller, 8mm Allen wrench. And that's why the weight difference is greater.

Did you have some Hollowgrams that failed?

Have you installed the HS yet?

This new expander looks like it will provide less support for the clamping forces of the stem versus the previous version. Does this represent new thinking on Cannondale's part regarding how much support the steerer actually needs?

_________________
2012 Cannondale Supersix Evo 2 /// 2000 Ritchey Swiss Cross

Does not look like less support from what I've seen - the difference seems to be the scalloping of the "top cap" vs the current solid design. Looks like an old school plastic bar end plug now with "fins".

Since the clamping forces will be directly against the new "fins" there should be no loss in strength. Similar to the way a cardboard box is extremely strong on one axis but not the other.

Looks smart.

_________________
Fear is healthy, panic can be deadly