Braze-On Extender/Adapter
Moderator: robbosmans
The new 2012 Sram red front derailleur only has one mounting hole, unlike the old models which had two. Because of this, I can't get it low enough on my Cervelo S5 to be able to work with the chainring i have on there now (45t). Is there such a thing as an extender or adapter for this reason? I can barely get away with using a rival der. on the lowest setting.
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
-
- Shop Owner
- Posts: 1980
- Joined: Sat Jun 13, 2009 4:02 am
- Location: NoVA/DC
gotta ask- cervelo s5 with a 45t? junior?
if i was going to go to a machine shop to have an extender made, i would just ask them to make a revised front derailleur mount altogether. the one on the s5 bolts on.
if i was going to go to a machine shop to have an extender made, i would just ask them to make a revised front derailleur mount altogether. the one on the s5 bolts on.
-
- Posts: 1629
- Joined: Fri Oct 28, 2011 3:25 am
- Location: United Kingdom of Great Britain and Northern Ireland
Knock the existing bracket off with a lump hammer, and fit a clamp-on front mech.
What monkeys made your frame? Contact them and explain to them that some of us who ride bikes are not pro's, live in mountainous areas, or are juniors and have to, by default, use a small outer chainring.
What monkeys made your frame? Contact them and explain to them that some of us who ride bikes are not pro's, live in mountainous areas, or are juniors and have to, by default, use a small outer chainring.
-
- Shop Owner
- Posts: 1980
- Joined: Sat Jun 13, 2009 4:02 am
- Location: NoVA/DC
Kidding... Right?
Just in case youre not, the mount is bolted on, hammer not needed. S5 seat tube is about as non-round as it gets too.
Just in case youre not, the mount is bolted on, hammer not needed. S5 seat tube is about as non-round as it gets too.
Yes, junior.
I called both the shop and Cervelo themselves, no such thing. Clamp-on is not an option for this frame. I might be able to get away with it if my FD had two mounting holes, but of course Sram with their new Red decided to put only one.
I called both the shop and Cervelo themselves, no such thing. Clamp-on is not an option for this frame. I might be able to get away with it if my FD had two mounting holes, but of course Sram with their new Red decided to put only one.
-
- Posts: 284
- Joined: Tue Dec 20, 2011 12:43 am
- Location: Los Angeles, CA
Just run the old force and call it a day then.
Yea, use an old red steel, or a force FD. I've heard good things about the new Yaw type Red FD, but my '10 or '11 Force FD shifts absolutely perfectly with my compact, couldn't be happier. Add a chain catcher if you want (I did), and you have a FD that is about the same as the new REd in function.
- chazzawoods
- Posts: 62
- Joined: Mon Aug 06, 2012 12:28 pm
I'd get a metal shop to make you a new mount for the front derailleur, the bolt on area can then extend further down the frame for your smaller chainring. Personally, I wouldn't take any chances with your expensive SRAM fd. Alternatively, you may be able to buy a new mounting plate online.
- chazzawoods
- Posts: 62
- Joined: Mon Aug 06, 2012 12:28 pm
-
- Posts: 284
- Joined: Tue Dec 20, 2011 12:43 am
- Location: Los Angeles, CA
I'm reading through all these suggestions to fashion a braze on hanger, but using an old Force or Red steel FD is going to be the most inexpensive and quickest way to deal with your FD. At the junior level the weight savings are negligible unless the kid is a couple seconds off from hitting the podium.
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com