HOT: Active* forum members generally gain 5% discount at starbike.com store!
Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Articles FAQ Contact About




Post new topic Reply to topic  [ 5 posts ] 
Author Message
PostPosted: Sun Jan 16, 2011 5:40 am 
Offline
User avatar

Joined: Tue Mar 20, 2007 5:07 pm
Posts: 229
Location: Palo Alto, CA
Is switching an SRM PC7 between PM's on different bikes simply a matter of pairing the PC with the PM each time you switch? Long story, but in the next few months, I may end up with a Dura Ace PM on one bike and a Cannondale SRM, both wireless, on another. I assume it's simple, but want to confirm and couldn't find anything on the SRM site, ww, etc.

Also, the PM's would have different slopes, but I assume the pairing would account for that in terms of the PC7 receiving info. However, would there be any problem using Training Peaks if switching back and forth occasionally? Anything I'm missing?

Thanks.


Top
 Profile  
 
PostPosted: Sun Jan 16, 2011 11:21 am 
Offline

Joined: Wed Mar 17, 2004 1:38 pm
Posts: 1252
What you describe shouldn't be a problem. The only hiccup may come if you re-calibrate the powermeters and the measured slope differs from the original slope that is transmitted by the pm. You will then have to manually adjust the slope in the pc7 each time you switch between bikes, or do it with the software before or after recording the ride.


Top
 Profile  
 
Posted: Sun Jan 16, 2011 11:21 am 


Top
  
 
PostPosted: Sun Jan 16, 2011 5:00 pm 
Offline

Joined: Sat Dec 13, 2003 2:25 am
Posts: 4453
Location: Canada
My personal recommendation is to turn-off the 'automatic' function of the PC7. I am not convinced that the 'bugs' are out of it yet. Rather, I recommend that you manually input slope, as in previous editions. You will be guaranteed to have no problems then.


Top
 Profile  
 
PostPosted: Fri Dec 14, 2012 3:59 am 
Offline

Joined: Wed Oct 06, 2010 3:38 am
Posts: 92
Geoff wrote:
My personal recommendation is to turn-off the 'automatic' function of the PC7. I am not convinced that the 'bugs' are out of it yet. Rather, I recommend that you manually input slope, as in previous editions. You will be guaranteed to have no problems then.


digging up an old thread, but i wonder what these referenced bugs are.

i've been using a garmin device to update the slope in multiple SRMs (it's very convenient when you discovered the slope does not match what is set at the factory--thus, you don't have to remember (a) what the slope should be and (b) to make the change before every ride.

the power meter itself can store this value and transmit it back to the head unit. before i used this method, i found that no matter how careful i was, i did not always remember to switch the slope when riding a different bike, and this resulted in some funky situations.


Top
 Profile  
 
PostPosted: Fri Dec 14, 2012 3:13 pm 
Offline

Joined: Sat Dec 13, 2003 2:25 am
Posts: 4453
Location: Canada
Try it and you'll see what I mean. As you are doing your workouts, the wattage sometimes just 'looks' and 'feels' wrong (high or low). The other 'problem' is that the slope of the PowerMeter is set at the factory when it is built. When you re-calibrate over the years, the 'original' slope is still set in the PowerMeter. If you choose the automatic slope detector, it will choose the old slope. In order to avoid that (and be 100% sure), you can hard-key the slope.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 


Who is online

Users browsing this forum: Attermann, Bluemoon17, boots2000, Exabot [Bot], ipaul, lannes, wasfast and 35 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Dura-ace 9000: Problem switching to smallest cog-wheel

in Road

luminous

11

692

Wed Apr 02, 2014 3:33 am

afalts View the latest post

There are no new unread posts for this topic. Colnago C59: Switching Headsets

in Road

SGcyclist

1

291

Wed Apr 23, 2014 2:40 am

willy View the latest post

There are no new unread posts for this topic. Di2 Cat eye wiring problem

in Road

yumseyo

4

253

Wed Aug 06, 2014 8:54 pm

yumseyo View the latest post

There are no new unread posts for this topic. Di2 firmware problem

in Road

rokkstar

12

533

Thu Aug 28, 2014 4:03 am

tnc1970 View the latest post

There are no new unread posts for this topic. Mix n Match shifting problem

in Road

jekyll man

2

328

Thu May 08, 2014 7:08 pm

jekyll man View the latest post


It is currently Sat Aug 30, 2014 11:48 pm

All times are UTC + 1 hour




Advertising   –  FAQ   –  Contact   –  Convert   –  About

© Weight Weenies 2000-2013
hosted by starbike.com


How to get rid of these ads? Just register!


Powered by phpBB