Fsa omega bb86 bottom bracket...ultrgra 6700 cranks?do they work together?
Getting my partner a giant defy 3 with a fsa omega compact BUT im wanting to use the ultegra compact c.set
Will it work with this bb or do i need to order some new bearings.?
Ive done a search but inconclusive

Thx in advance.

_________________
tcr's rule !

stefanpearce@rocketmail.com

Yes, I'm fairly certain that should work, I'm running Ultegra 6700 cranks on a BB86 shimano pressfit and believe it will work equally well; however haven't used an FSA BB86.

_________________
Rose Xeon CRS 3000

I'm wondering if they'll work the other way around, a Shimano BB86 with a SRAM GXP/FSA crank

_________________
Apparently my bikes were talking the other day & are undecided whether to upgrade the current rider or get a new one...

one of the schemers...

The drive side bearing will work. GXP nds spindles are tapered down to a smaller diameter iirc

_________________
CAAD10: viewtopic.php?f=10&t=107612

As long as the bb86 pressfit adapters are not for FSA K-Force Light or SLK Light, then there should be no issues with Shimano cranks. I learned the hardway while trying to find more economical hybrid ceramics, that the spindle of the FSA K-Force Light and SLK Light cranksets are ~.5mm larger in diameter thus will not fit into a BB86 pressfit adapter that is designed for Shimano Hollowtech II spindles.

_________________
Michael - The Anaerobic Threshold is neither...