I saw that Gumgardener removed the paint from his THM crank but I cant find how he did it.....Maybe I read something about using a razor blade? Im not sure. Any help would be appreciated

Start reading here viewtopic.php?f=10&t=98607&start=240#p864974 , and for the next page or so. That may not tell you to the level of detail you want, but it's something.

Note this post from andy2, who is still actively posting here.

Hmm something about steel wool, that's weird, I'll check into that thanks!!

Just use some very fine wet and dry paper , Its very easy and you will see the coat start to come off . I did the same to my Helion crankset . I then used some areo 303 to give it a finish and some protection against the suns rays . I would not use a razor blade as that is more for getting the paint off a frame which can be quite thick.

What are you trying to achieve?
Do you want the satin/matte finish or are you planning to re-paint the crankset?

I used wet&dry sandpaper. I contacted THM and told them that I was planning to re-paint my Clavicula's myself and they sent me new decals

Be careful not to take too much off the pinch bolt holes. It's easy to do.

_________________
2012 Scott Foil Premium

I tried a small spot with some 600 grit and it worked pretty well. It actually looks ok on my Colnago in gloss so I may leave it like that for a while. Once I get my Zero.7 ill probably do it