New RED crankset is ordered, which bb should I get ?

Discuss light weight issues concerning road bikes & parts.
Locked
Wadl
Posts: 39
Joined: Thu Sep 06, 2012 7:37 pm

by Wadl

Hi guys,

finaly ordered a RED exogram compact crankset yesterday.

I don't know anything about SRAM parts (!).

Can you direct me over to which bottom bracket I should get (I read that ceramic one are very high maintenance and with a new kid, I don't have much time to put on my bike except to ride it, so I can't really buy it)

any good bb that doesnt require heavy maintenance (like my current Dura-ace that I have, install it and forget it type)?

Thank you !

by Weenie


User avatar
prendrefeu
Posts: 8608
Joined: Wed Oct 31, 2007 10:32 pm
Location: Los Feliz, Los Angeles, California
Contact:

by prendrefeu

There are a lot of threads on this already, please search.
While your enthusiasm is great, use that for riding.

You don't need to start a new thread for every single component.
Exp001 || Other projects in the works.

onikazi
Posts: 10
Joined: Fri Dec 23, 2011 2:07 am

by onikazi

depends on what the spindle on your crank is, generally either gxp or BB30, it should say so on the box. Its also dependent on whether your bike takes external (most) or pressfit (some of the newer frames)

i wouldnt say ceramic bearings are trouble, they just wear out quicker than most.

deek
Posts: 406
Joined: Fri Aug 31, 2012 6:32 pm

by deek

I'm pretty sure it comes with bearings if you buy it aftermarket.

User avatar
Frankie - B
Administrator
Posts: 6591
Joined: Mon Jun 02, 2003 8:17 am
Location: Drenthe, Holland

by Frankie - B

@wadl,

Thank you for using our forum, i hope that it will give you as much joy as it gives most users. A lot of the users on Weight Weenies are pretty good home mechanics and they can give you all the answers you need in about 0.5 seconds. However, the WW community isn't super enthusiastic about users that 'just ask a general question'.
in your case you should add what BB spindle the crankset has and what BB your frame has. There are quite a few options out there nowadays. BSA, italian, BB30 and BB92 to name a few. I would suggest to you to check the spec sheet of your bike and see what bb type it takes. then check what BB spindle you have ordered and see if there is a match. if there is a match, go ahead and order what you need.

You will have so much more pride when you mount and ride that crank and BB on your bike.
'Tape was made to wrap your GF's gifts, NOT hold a freakin tire on.'

Locked
  • Similar Topics
    Replies
    Views
    Last post