Page 1 of 2

Zipp Vukasprint install

Posted: Tue Aug 14, 2012 8:55 pm
by jezza995
Decided to loose some weight from the front end by swapping the alloy bars for Zipps carbon Vukasprint.

Image

Current set up with 3T comfortable but heavy.

Image

Image

Old bar tape and Fizik gel pads are suprisingly heavy!

Image

New bars, size 44 not that much lighter really 50 grams saving.

Image

Quite a saving here though!

Image

Different shapes of the two bars, slightly more reach on the Zipps.

Image

Bars replaced and cables routed through the bars.

Image

Wrapped and ready to ride.

Image

Aero front end.

Image

Zipps look fantastic and feel ultra stiff and comfortable, weight lost 153 grams! Easy to install, used the same outers but replaced the cables. Bar tape is Zipp Service Corsa, i like white but not sure if black would look better. Will also fit a Zipp Service Corsa SL stem at some point. The Campagnolo Zondas will have to go, some serious weight saving to be had there i think! Proper test ride report soon.

Zipp Vukasprint install

Posted: Tue Aug 14, 2012 8:55 pm
by Weenie

Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



Re: Zipp Vukasprint install

Posted: Tue Aug 14, 2012 9:35 pm
by chazzawoods
Hi what size were your ergonova bars? thanks

Re: Zipp Vukasprint install

Posted: Tue Aug 14, 2012 9:46 pm
by cerro
What do you think of the handlebar now tried it compared to Ergonova?

Re: Zipp Vukasprint install

Posted: Tue Aug 14, 2012 10:22 pm
by jezza995
Ergonova bars are size 44, they are measured centre to centre at the bar ends but taper in towards the hoods so are more like a 42! The Zipps are measured edge to edge so i got a size 44, haven't had chance to ride with the Zipps yet, will post a review soon!

Re: Zipp Vukasprint install

Posted: Wed Aug 15, 2012 6:45 am
by Werdna
Some of the best looking bars (Zipp) in my opinion (especially from the front!)

Re: Zipp Vukasprint install

Posted: Wed Aug 15, 2012 1:39 pm
by bura
It is ok to choose a carbon bar for weight savings. The weight comparision should have been done beween the Vukasprint and Ergonova Ltd.
The 44 cm Ergonova Ltd weighs 204grams.

Re: Zipp Vukasprint install

Posted: Wed Aug 15, 2012 9:41 pm
by jezza995
Well test rode these today, very very happy with them! First thing I noticed was the reduction in road buzz through the bars, felt much smoother than the alloy Ergonova Pro. All positions are very comfortable even on the tops without bar tape, gloves definatley help here though, I can imagine the bare carbon would be quite slippery without them. My ride involved a few miles into a 30mph gusty head wind, the bike felt great slicing through the wind. I'm not saying the Zipps make a massive difference, it just felt a tad easier! Out of the saddle climbing efforts also felt good with no flex whatsoever. There is approx 7mm more reach with these compared to the Ergonova, I did feel a bit stretched so may go to a 100mm stem from a 110mm, however being slightly more streched helps to flatten my back so I'm not sure!
In conclusion these are well worth the money in my opinion, they perform exceptionally well and look fantastic!

Re: Zipp Vukasprint install

Posted: Wed Aug 15, 2012 9:56 pm
by NWSAlpine
bura wrote:It is ok to choose a carbon bar for weight savings. The weight comparision should have been done beween the Vukasprint and Ergonova Ltd.
The 44 cm Ergonova Ltd weighs 204grams.


Why would he compare the Ltd as he owns the pro and bought a Vukka Sprint.

Re: Zipp Vukasprint install

Posted: Thu Aug 16, 2012 12:36 pm
by bura
NWSAlpine wrote:
bura wrote:It is ok to choose a carbon bar for weight savings. The weight comparision should have been done beween the Vukasprint and Ergonova Ltd.
The 44 cm Ergonova Ltd weighs 204grams.


Why would he compare the Ltd as he owns the pro and bought a Vukka Sprint.


Once more:Because the PRO is a alloy bar. So why compare the weight of a alloy bar with a CF one?
Isn't is predictable that you will save weight with a CF bar?
What is the point?
If it is to show that Zipp is lighter than 3T, wrong bar has been choosen for the comparision.
The Ltd is 3T's lightest CF series.

Further why compare the weight of full handlebar tape with half handlebar tape?

Re: Zipp Vukasprint install

Posted: Thu Aug 16, 2012 12:54 pm
by gospastic
He's comparing because that's what he owns. What don't you get about that?

Re: Zipp Vukasprint install

Posted: Thu Aug 16, 2012 1:52 pm
by jezza995
bura wrote:
NWSAlpine wrote:
bura wrote:It is ok to choose a carbon bar for weight savings. The weight comparision should have been done beween the Vukasprint and Ergonova Ltd.
The 44 cm Ergonova Ltd weighs 204grams.


Why would he compare the Ltd as he owns the pro and bought a Vukka Sprint.


Once more:Because the PRO is a alloy bar. So why compare the weight of a alloy bar with a CF one?
Isn't is predictable that you will save weight with a CF bar?
What is the point?
If it is to show that Zipp is lighter than 3T, wrong bar has been choosen for the comparision.
The Ltd is 3T's lightest CF series.

Further why compare the weight of full handlebar tape with half handlebar tape?

The only reason i've shown the weight of the removed bars and tape is because I wanted to see how much I saved by replacing them. Obviously the carbon bars and new tape would be lighter, I just thought as this site is called Weight Weenies someone might be interested !

Re: Zipp Vukasprint install

Posted: Thu Aug 16, 2012 3:43 pm
by NWSAlpine
bura wrote:
NWSAlpine wrote:
bura wrote:It is ok to choose a carbon bar for weight savings. The weight comparision should have been done beween the Vukasprint and Ergonova Ltd.
The 44 cm Ergonova Ltd weighs 204grams.


Why would he compare the Ltd as he owns the pro and bought a Vukka Sprint.


Once more:Because the PRO is a alloy bar. So why compare the weight of a alloy bar with a CF one?
Isn't is predictable that you will save weight with a CF bar?
What is the point?
If it is to show that Zipp is lighter than 3T, wrong bar has been choosen for the comparision.
The Ltd is 3T's lightest CF series.

Further why compare the weight of full handlebar tape with half handlebar tape?



Once again it's a simple comparison of what he had vs what he has now. Doesn't make sense to compare bars he doesn't own or doesn't plan to own.

If you used your logic then he should be compairing the weight of the Ltd to the Zipp Sl bar which is 170g. At the end of the day you are doing a comparison that makes no sense for this thread's intentions.

Re: Zipp Vukasprint install

Posted: Thu Aug 16, 2012 3:51 pm
by NWSAlpine
Back on topic. The bars look sick! I wanted to give them a shot but at the end of the day I went with the SC CSL because I much prefer the short reach and compact bars. Vuka Sprint short reach compact and I'm all over it.

Re: Zipp Vukasprint install

Posted: Thu Aug 16, 2012 5:41 pm
by goodboyr
jezza995 wrote:Well test rode these today, very very happy with them! First thing I noticed was the reduction in road buzz through the bars, felt much smoother than the alloy Ergonova Pro. All positions are very comfortable even on the tops without bar tape, gloves definatley help here though, I can imagine the bare carbon would be quite slippery without them. My ride involved a few miles into a 30mph gusty head wind, the bike felt great slicing through the wind. I'm not saying the Zipps make a massive difference, it just felt a tad easier! Out of the saddle climbing efforts also felt good with no flex whatsoever. There is approx 7mm more reach with these compared to the Ergonova, I did feel a bit stretched so may go to a 100mm stem from a 110mm, however being slightly more streched helps to flatten my back so I'm not sure!
In conclusion these are well worth the money in my opinion, they perform exceptionally well and look fantastic!


Perhaps someone could explain the supposed aero advantage of these bars, given your body is directly behind them and blocks the wind anyhow.

Re: Zipp Vukasprint install

Posted: Thu Aug 16, 2012 5:41 pm
by Weenie

Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



Re: Zipp Vukasprint install

Posted: Thu Aug 16, 2012 6:10 pm
by jezza995
goodboyr wrote:
jezza995 wrote:Well test rode these today, very very happy with them! First thing I noticed was the reduction in road buzz through the bars, felt much smoother than the alloy Ergonova Pro. All positions are very comfortable even on the tops without bar tape, gloves definatley help here though, I can imagine the bare carbon would be quite slippery without them. My ride involved a few miles into a 30mph gusty head wind, the bike felt great slicing through the wind. I'm not saying the Zipps make a massive difference, it just felt a tad easier! Out of the saddle climbing efforts also felt good with no flex whatsoever. There is approx 7mm more reach with these compared to the Ergonova, I did feel a bit stretched so may go to a 100mm stem from a 110mm, however being slightly more streched helps to flatten my back so I'm not sure!
In conclusion these are well worth the money in my opinion, they perform exceptionally well and look fantastic!


Perhaps someone could explain the supposed aero advantage of these bars, given your body is directly behind them and blocks the wind anyhow.

A massive amount of a riders energy is spent pushing through the air something like 80% according to Chris Bordman, so any surface pushing less air will have some benifit !