Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About
It is currently Wed May 04, 2016 12:58 pm
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED

If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062


All times are UTC+01:00





Post new topic  Reply to topic  [ 6 posts ] 
Author Message
PostPosted: Wed Jul 09, 2014 8:36 pm 
Offline

Joined: Wed Dec 07, 2011 1:26 am
Posts: 414
Location: California's country side
The latest 3T ergonova has internal cable routing. Or, at least the carbon version has.

I was wondering if there is a trick to stop the cable from rattling? I will only running brake cable, no shifters.

I was going to just wrap the bar tape a little pass the lever and leave the top bare... Now that you don't need a piece of tape to hold the cable near the stem thanks to internal routing.. is that how you would wrap it?

Here is a picture that I found.
Image


Top
   
PostPosted: Wed Jul 09, 2014 8:48 pm 
Offline
User avatar

Joined: Wed Mar 06, 2013 4:23 pm
Posts: 614
Location: Austin, TX
Hey that's my picture! That's actually a Tornova bar but I suppose the routing will be similar. I didn't do anything other than run the cable through it and it has never rattled. It's actually a really tight fit and the housing will press up against the inside of the bar keeping it from rattling. The trick to routing it is to run your cable through first and then let the housing follow it through. Trying to route the housing first is next to impossible.

_________________
My Cervelo R5
My Lynskey Helix
My MTB


Top
   
PostPosted: Wed Jul 09, 2014 9:03 pm 
Offline

Joined: Wed Dec 07, 2011 1:26 am
Posts: 414
Location: California's country side
Oh nice :)
thanks google images.

I will only have a brake cable though so I figure the fit will be loose if I don't tape up to the second opening.
I think I can use a piece of silicone hose to cushion the cable itself.

It comes with some plastic tubes already to insert the steel cable through, the insert the housing like you mentioned.


Top
   
PostPosted: Wed Jul 09, 2014 9:44 pm 
Offline
User avatar

Joined: Wed Mar 06, 2013 4:23 pm
Posts: 614
Location: Austin, TX
I run the brake cable as well as a Di2 (smaller e-tube wire) through there. Silicone might be a good idea though if it's not as tight as the one I have.

_________________
My Cervelo R5
My Lynskey Helix
My MTB


Top
   
PostPosted: Thu Jul 10, 2014 5:40 am 
Offline

Joined: Tue May 23, 2006 4:33 am
Posts: 924
Mount little baby zip ties on the e-wire so they are clamped hand-tight on the e-wire and the tail is sticking straight out, and push them through the hole along with the e-wire. They will try to expand and push the e-wire against the side of the tubing. No noise and no wear from vibration. Do the same with frame tube noise.


Top
   
PostPosted: Fri Mar 04, 2016 2:17 pm 
Offline
User avatar

Joined: Tue Aug 28, 2012 2:45 pm
Posts: 1414
Location: Stockholm, The Arctic...
How does this work with D-A 9000 levers/levers?


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 6 posts ] 

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Handlebar with internal cable routing and DI2

in Road

muntos

5

525

Sun Nov 15, 2015 3:28 am

mimason View the latest post

There are no new unread posts for this topic. Suggestion for handlebar with internal routing

in Road

AndreLM

11

1829

Thu Jun 11, 2015 3:16 pm

Philbar72 View the latest post

There are no new unread posts for this topic. Internal / External Cable routing

in Road

briantumma

7

531

Fri Jan 15, 2016 12:17 pm

briantumma View the latest post

There are no new unread posts for this topic. Full internal handlebar/stem routing

in Road

aerodynamiq

1

603

Sun Nov 22, 2015 7:50 am

AJS914 View the latest post

There are no new unread posts for this topic. Internal cable routing safety concern? (bike specific)

in Road

CPongpanich

7

452

Mon Jan 25, 2016 4:52 pm

CPongpanich View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: Bing [Bot], CAFERACER and 32 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited