Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About Impressum
It is currently Sun Dec 04, 2016 11:36 am
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED
- Avatars cannot be uploaded ✔ FIXED

Please note that we will soon do some changes in WW board template design in case to get a fully mobile/desktop responsiveness board!
If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062


All times are UTC+01:00





Post new topic  Reply to topic  [ 12 posts ] 
Author Message
 Post subject: Pressfit30 creak
PostPosted: Fri Aug 10, 2012 6:54 pm 
Offline

Joined: Fri Jun 03, 2011 6:30 pm
Posts: 100
Arghh. Rode super six evo after washing and it creaks awfully. Have eliminated most obvious things such as qrs headset stem bolts pedals chainring bolts wheels shoes etc. are these bbs prone to wear or do the cranks need regular attention?


Top
   
 Post subject: Pressfit30 creak
Posted: Fri Aug 10, 2012 6:54 pm 


Top
   
 
 Post subject: Re: Pressfit30 creak
PostPosted: Fri Aug 10, 2012 9:08 pm 
Offline

Joined: Mon Oct 15, 2007 9:28 pm
Posts: 1225
Yes- especially prone to wear/creaking especially the PF30 and Hollowgram crank combo.


Last edited by Frankie - B on Sun Aug 12, 2012 4:45 pm, edited 1 time in total.
please don't quote when making a reply.


Top
   
 Post subject: Re: Pressfit30 creak
PostPosted: Sat Aug 11, 2012 3:27 am 
Offline

Joined: Mon Jan 24, 2011 8:09 pm
Posts: 919
Loctite 609. Done.


Top
   
 Post subject: Re: Pressfit30 creak
PostPosted: Sat Aug 11, 2012 4:38 am 
Offline

Joined: Tue Aug 09, 2011 2:25 pm
Posts: 487
Location: Aloha, Oregon
+1
The solution for the BB90 creek also

_________________
Let's finish the ride with a 20% grade.

2011 Scott Addict R1 DA 7900 Matt black
2012 Scott CR1 Pro Ultegra 6700
2013 Cannondale EVO Hi mod DA 9000
2015 Cervelo R5 DA 9000 No rotor.
2016 Specialized SWorks Tarmac Sram Red


Top
   
 Post subject: Re: Pressfit30 creak
PostPosted: Sat Aug 11, 2012 7:18 am 
Offline

Joined: Fri Jun 03, 2011 6:30 pm
Posts: 100
Re-install crank or ne bb? I can't believe this has worn after 6 months use!


Top
   
 Post subject: Re: Pressfit30 creak
PostPosted: Sun Aug 12, 2012 4:20 am 
Offline

Joined: Sat May 07, 2011 12:23 am
Posts: 185
Probably not worn out, just need to reinstall with loctite as mentioned above.


Top
   
 Post subject: Re: Pressfit30 creak
PostPosted: Sun Aug 12, 2012 4:39 am 
Offline

Joined: Mon Jan 24, 2011 8:09 pm
Posts: 919
Exactly, getting the tolerances to such tight standards for the BB itself and the outer diameter of the bearings is difficult.

Surprised more pressfit, bb30 don't creak.


Top
   
 Post subject: Re: Pressfit30 creak
PostPosted: Sun Aug 12, 2012 4:00 pm 
Offline

Joined: Sun Aug 23, 2009 10:15 am
Posts: 114
Before you reinstall with loctite, perhaps take the crank out, clean, regrease and make certain the left hand crank bolt is torqued up correctly - 45 to 55nm i believe, this worked for my GFs Caad10 when it started creaking.


Top
   
 Post subject: Re: Pressfit30 creak
PostPosted: Sun Aug 12, 2012 7:46 pm 
Offline

Joined: Fri Jun 03, 2011 6:30 pm
Posts: 100
Where expectantly should the Loctite or grease be applied?


Top
   
 Post subject: Re: Pressfit30 creak
PostPosted: Sun Aug 12, 2012 7:54 pm 
Offline

Joined: Sun Aug 23, 2009 10:15 am
Posts: 114
http://www.bike-components.de/bedienung ... g-info.pdf


Top
   
 Post subject: Re: Pressfit30 creak
PostPosted: Mon Aug 13, 2012 5:16 pm 
Offline

Joined: Fri Jun 03, 2011 6:30 pm
Posts: 100
Regressing appears to have worked!


Top
   
 Post subject: Re: Pressfit30 creak
PostPosted: Fri Aug 17, 2012 12:43 am 
Offline

Joined: Tue Dec 23, 2008 2:57 pm
Posts: 827
Location: NYC
repacking with grease is only a temporary fix...like others have posted above, use Loctite 609 and be done with it.EM3

_________________
______________

My 2013 Cervelo R5


Top
   
 Post subject: Re: Pressfit30 creak
Posted: Fri Aug 17, 2012 12:43 am 


Top
   
 
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 12 posts ] 

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Supersix Evo Press fit BB30 creak

in Road

rmr40

6

581

Sat Nov 26, 2016 3:01 pm

superdx View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: Bogan, Google Adsense [Bot], jonasd, Mockenrue, MSNbot Media, Yahoo [Bot] and 14 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited