Weight Weenies
http://weightweenies.starbike.com/forum/

Whisky Parts Co. No.7 carbon front fork
http://weightweenies.starbike.com/forum/viewtopic.php?f=3&t=105696
Page 1 of 1

Author:  SWijland [ Sat Aug 04, 2012 2:57 pm ]
Post subject:  Whisky Parts Co. No.7 carbon front fork

I haven't same many of these one the forum yet (or anywhere else for that matter), so I thought it would be nice to show my new fork.

It is a Whisky Parts Co. No.7 1 1/8 inch road fork with a UD gloss finish. As some of you might know I have been looking for a fork to match my Renovo R1 wooden frame for quite a while now. Non of the forks from Easton, Enve or Alpha-Q were what I was looking for. Luckily for me Whisky Parts Co. recently started selling the No.7 road forks. I really like the fact that the fork has only very minimal graphics and I think the shape of the fork is very nice as well. Weight is around 360 grams uncut.

Attachments:
Vork1.jpg
Vork1.jpg [ 13.55 KiB | Viewed 2185 times ]
Vork2.jpg
Vork2.jpg [ 13.3 KiB | Viewed 2185 times ]
Vork3.jpg
Vork3.jpg [ 13.97 KiB | Viewed 2185 times ]
Vork4.jpg
Vork4.jpg [ 12.77 KiB | Viewed 2185 times ]

Author:  SSB [ Sat Aug 04, 2012 3:03 pm ]
Post subject:  Re: Whisky Parts Co. No.7 carbon front fork

I had one that came with me eBay CAAD10 frame, and I think it's a very good quality fork. I had the matte one, which appeared to be very well finished and at a weight that's comparable with the popular aftermarket forks.

I would be interested in hearing about the stiffness of the fork and how it rides.

Author:  Weenie [ Sat Aug 04, 2012 3:03 pm ]
Post subject:  Re: Whisky Parts Co. No.7 carbon front fork


Author:  fa63 [ Sat Aug 04, 2012 3:31 pm ]
Post subject:  Re: Whisky Parts Co. No.7 carbon front fork

I have one on one of my bikes:

Image

I think it weighed somewhere around 350g after cutting (I didn't have to cut much). I have been very happy with the quality and performance, although I have to say it does feel a bit harsher than the Ritchey WCS I have on another bike (another Tsunami which is almost identically equipped).

Author:  bones [ Sat Aug 04, 2012 3:44 pm ]
Post subject:  Re: Whisky Parts Co. No.7 carbon front fork

Nice looking fork! Anyone know how wide a tire you can squeeze in that thing???

Author:  fa63 [ Sat Aug 04, 2012 5:01 pm ]
Post subject:  Re: Whisky Parts Co. No.7 carbon front fork

I have used 27mm tires with no problem.

Author:  Werdna [ Sat Aug 04, 2012 5:58 pm ]
Post subject:  Re: Whisky Parts Co. No.7 carbon front fork

That would match the Renovo much better than the Easton in my opinion.

Author:  Weenie [ Sat Aug 04, 2012 5:58 pm ]
Post subject:  Re: Whisky Parts Co. No.7 carbon front fork


Author:  Wingnut [ Sun Aug 05, 2012 2:08 pm ]
Post subject:  Whisky Parts Co. No.7 carbon front fork

Is there a choice of rake?

Page 1 of 1 All times are UTC+01:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/