HOT: Active* forum members generally gain 5% discount at starbike.com store!
Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Articles FAQ Contact About




Post new topic Reply to topic  [ 3 posts ] 
Author Message
PostPosted: Sat Aug 11, 2012 9:42 pm 
Offline

Joined: Tue Nov 04, 2008 6:44 pm
Posts: 230
Quick question. I'm struggling to set the bearing preload correctly on my Soul Prodigy V3 rear hub.

The rear axle has a screw on end cap on the drive side. If I screw this right down (until it bottoms out) then there is too much bearing preload and the axle will barely turn. If I don't screw it down fully, it works loose - I could use a bit of thread lock but that doesn't seem right!

Any advice would be appreciated. Thanks.


Top
 Profile  
 
PostPosted: Sat Aug 11, 2012 11:59 pm 
Offline
in the industry

Joined: Sat Nov 17, 2007 4:35 am
Posts: 113
Location: Singapore
Hi Gilles,

The Prodigy hub can't be pre-loaded, as the entire assembly is spaced. What is actually going on in your hub is the washer between the freehub and hub body bearings is deformed and getting stuck on the axle. Remove the washer, flatten it with a mallet and file the inside to get it to not bind on the axle and you should be able to tighten the endcaps without any binding.


Top
 Profile  
 
Posted: Sat Aug 11, 2012 11:59 pm 


Top
  
 
PostPosted: Sun Aug 12, 2012 6:09 pm 
Offline

Joined: Tue Nov 04, 2008 6:44 pm
Posts: 230
I did exactly what you described and it worked perfectly. The hubs now spins smoothly with the end caps fully tightened.

Many thanks.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 


Who is online

Users browsing this forum: Baidu [Spider], Bing [Bot], fa63, rbrtwyn and 44 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Cervelo Prodigy Build?

in Road

SolidSnake03

1

578

Sat Oct 26, 2013 9:41 pm

Stefano View the latest post

There are no new unread posts for this topic. Help Identifying a Cervelo Prodigy?!

in Road

SolidSnake03

3

578

Sat Oct 26, 2013 3:53 am

Buffalo View the latest post

There are no new unread posts for this topic. EPS 'on the fly' adjustment

in Road

random101

6

367

Fri Aug 22, 2014 7:03 pm

WESTMOTORSPORTS View the latest post

There are no new unread posts for this topic. Hub adjustment Lightweight Standard III

in Road

tomtom

0

376

Thu May 29, 2014 9:50 pm

tomtom View the latest post

There are no new unread posts for this topic. SRAM Red read derailleur shifting adjustment

[ Go to page: 1, 2 ]

in Road

ictus

17

504

Thu Oct 23, 2014 7:49 pm

rijndael View the latest post


It is currently Fri Oct 24, 2014 4:42 pm

All times are UTC + 1 hour




Advertising   –  FAQ   –  Contact   –  Convert   –  About

© Weight Weenies 2000-2013
hosted by starbike.com


How to get rid of these ads? Just register!


Powered by phpBB