Weight Weenies

Posted: **Mon Jul 23, 2012 10:59 am**

I'm switching my 'my first clipless' Keo Classics for some Speedplay Zeros. Is there any performance difference between the chrome-moly axels and the steel? It appears they both have the same bearings and cleats?

$60 (rrp) for 4g (claimed) is absurd, even for WW.

Posted: **Mon Jul 23, 2012 10:59 am**

Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓

www.starbike.com

Posted: **Mon Jul 23, 2012 12:03 pm**

They're 10 g. difference, and one of them is manufactured in the US with more expensive material and one is made in Taiwan with less expensive material.

Posted: **Mon Jul 23, 2012 12:20 pm**

The stainless also does not have a coating that will get chipped/scratched up over time. I went with Stainless because of better resistance to weather and adverse conditions based on the materials properties as opposed to just the outer layer/coating.

Posted: **Mon Jul 23, 2012 3:57 pm**

if you don't ride in the wet, especially in winter when roads are salted, then there's not much difference

i've got the stainless on my commute bike, a couple of years of soakings and salt spray, no corrosion, whereas chromoly ones do corrode, especially if salt water gets into the guts

if you do go for chromoly, put plenty of antiseize on the threads and redo once a year

Posted: **Mon Jul 23, 2012 5:18 pm**

I'm in the UK, so stainless it is. Thanks a lot.

Posted: **Mon Jul 23, 2012 5:28 pm**

I have both. I don't notice any difference.

I will say the black chromoly spindles look better with black cranks than the silver stainless spindles.

Posted: **Mon Jul 23, 2012 6:38 pm**

^^ Having both as well, I second that, though Im swapping the cromoly for Ti spindles, significantly lighter, for my light bike. that is a worthy usd 60 upgrade imho..

Posted: **Mon Jul 23, 2012 6:55 pm**

if upgrading to Ti spindles go with chromo. if not, go with stainless. i had the chromo ones - exposed spindle part got pretty rusty in less than a year... but i live by the ocean.

Posted: **Mon Jul 23, 2012 7:01 pm**

Does the ti speed plays have a weight limit

Posted: **Mon Jul 23, 2012 7:54 pm**

I searched out some older posts about the Ti spindles - and Speedplay's legal shenanigans. Chrome-moly it is, with a Ti upgrade at some point!

Posted: **Mon Jul 23, 2012 7:58 pm**

Mike, the Ti spindles I found (dulight) have a 105kg weight limit.

Posted: **Mon Jul 23, 2012 7:58 pm**

Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓

www.starbike.com

Weight Weenies

Speedplay Zero, chromo or stainless?

Speedplay Zero, chromo or stainless?

Speedplay Zero, chromo or stainless?

Re: Speedplay Zero, chromo or stainless?

Re: Speedplay Zero, chromo or stainless?

Re: Speedplay Zero, chromo or stainless?

Re: Speedplay Zero, chromo or stainless?

Re: Speedplay Zero, chromo or stainless?

Re: Speedplay Zero, chromo or stainless?

Re: Speedplay Zero, chromo or stainless?

Speedplay Zero, chromo or stainless?

Re: Speedplay Zero, chromo or stainless?

Re: Speedplay Zero, chromo or stainless?

Re: Speedplay Zero, chromo or stainless?