Hi all, i recently snapped the mount bolt on my very heavily tuned SRAM red (104gm), but i think this was because the jockey wheel jammed. anyway the derailleur snapped off and hopped into the wheel for a joy ride before hitting the chain stay and cracking my little baby rather badly. So while my wee girl is off at the hospital getting fixed i have become curious at stripping the frame down to the carbon and then custom painting it. My question is, for stripping the frame (Scott Addict R1 viewtopic.php?f=10&t=100739
) which has layers of clear-coat over the naked UD carbon, what should i do? I have the fork to practice on here so i can get it all working before i do the frame. But dont recall seeing carbo lift works on clearcoat only, does anyone know the knife / blade stripping technique? Also i dont have the time to be waiting for then using carbo lift to arrive.
So what i ask is does the blade technique work well, and if yes, how or what do you do? Or what other suggestions do people have?