HOT: Active* forum members generally gain 5% discount at starbike.com store!
Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Articles FAQ Contact About




Post new topic Reply to topic  [ 12 posts ] 
Author Message
 Post subject: Extending caliper reach?
PostPosted: Thu Jul 19, 2012 8:39 pm 
Offline

Joined: Wed Jun 09, 2010 10:44 am
Posts: 205
Any suggestions for getting about 2mm extra reach from my front DA 7900 calipers?

I am loathed to have to replace them for a BR650 (57mm drop), just for the sake of 2mm, but can't find a way out.

I tried flipping the DA pads around L/R because they kinda point upwards when normally installed, but this didnt really work (top of pad just off the rim, not on the tyre, but with a bit of wear it would be). Theoretically I could attempt to dremel/drill out 2mm from the fork dropouts but that's a bit scary!

Maybe a different shoe would give me just that extra bit of drop?

_________________
Di2x2


Top
 Profile  
 
 Post subject: Extending caliper reach?
Posted: Thu Jul 19, 2012 8:39 pm 


Top
  
 
PostPosted: Thu Jul 19, 2012 8:55 pm 
Offline

Joined: Mon Jul 26, 2004 8:57 pm
Posts: 740
Location: Ireland
How about drilling 2mm from the caliper pad holder holes?


Top
 Profile  
 
PostPosted: Thu Jul 19, 2012 8:56 pm 
Offline

Joined: Mon Jul 26, 2004 8:57 pm
Posts: 740
Location: Ireland
How about drilling 2mm from the caliper pad holder holes?


Top
 Profile  
 
PostPosted: Thu Jul 19, 2012 8:57 pm 
Offline

Joined: Wed Jun 09, 2010 10:44 am
Posts: 205
They only have about 3mm from hole to bottom edge.

_________________
Di2x2


Top
 Profile  
 
PostPosted: Thu Jul 19, 2012 9:08 pm 
Offline

Joined: Wed Jun 09, 2010 10:44 am
Posts: 205
Now something like this would work...

http://www.imperialsupplies.com/item/0765320" onclick="window.open(this.href);return false;

I can angle the bolt downwards with this get just about a 2mm drop, then use the toe-in on the shoe to level it up with the rim. Now to find them in the uk...

Edit: Turns out they are not so difficult to make with an inner tube nut and a dremel :)

_________________
Di2x2


Top
 Profile  
 
PostPosted: Thu Jul 19, 2012 11:35 pm 
Offline

Joined: Wed Jun 09, 2010 10:44 am
Posts: 205
So after about 90 mins dremelling, fitting those brake a shoes just simply refuse to toe in at such an angle, and so a. BR 650 now looks like the only realistic solution.

_________________
Di2x2


Top
 Profile  
 
PostPosted: Fri Jul 20, 2012 12:14 am 
Offline

Joined: Sun Jul 10, 2011 9:03 am
Posts: 292
Drop bolt?
http://sheldonbrown.com/dpdropbolt.html" onclick="window.open(this.href);return false;

No. Forget I mentioned it. :oops:

_________________
r o y g b i v


Top
 Profile  
 
PostPosted: Fri Jul 20, 2012 12:29 am 
Offline

Joined: Fri Feb 17, 2012 5:33 pm
Posts: 36
Location: Louisiana USA
You can try something that worked for me when converting a frame designed for 27 inch wheels to 700c.

All I did was shave 2mm from the top edge of the brake pad where it would contact the rim. Leave the part inside the shoe holder intact.

You probably won't even notice the decrease in braking force due to the decrease in contact area.


Top
 Profile  
 
PostPosted: Fri Jul 20, 2012 12:34 am 
Offline

Joined: Wed Jun 09, 2010 10:44 am
Posts: 205
Seems there no one selling them anymore, and not sure how they perform A specially designed shoe would be perfect, but doesnt look like they exist.

http://www.bentrideronline.com/messageb ... hp?t=54096" onclick="window.open(this.href);return false;

sums it up pretty nicely.

_________________
Di2x2


Top
 Profile  
 
PostPosted: Fri Jul 20, 2012 12:36 am 
Offline

Joined: Wed Jun 09, 2010 10:44 am
Posts: 205
2mm off a 7900 pad would be nearly half of it.

_________________
Di2x2


Top
 Profile  
 
PostPosted: Fri Jul 20, 2012 12:53 am 
Offline

Joined: Fri Feb 17, 2012 5:33 pm
Posts: 36
Location: Louisiana USA
The pads I have (Blue Reynolds) are 7.5 mm wide, so 2 mm is less than a third, closer to a fourth.

Older pads (like from sidepulls) are about 11 mm so 2 mm from that would be negligible indeed.


Top
 Profile  
 
PostPosted: Fri Jul 20, 2012 1:44 am 
Offline
Shop Owner

Joined: Sat Jun 13, 2009 4:02 am
Posts: 1951
Location: NoVA/DC
this is what you need but it looks like theyre not around anymore. im still looking.
Image


Top
 Profile  
 
Posted: Fri Jul 20, 2012 1:44 am 


Top
  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 12 posts ] 


Who is online

Users browsing this forum: Exabot [Bot], Google [Bot], Google Adsense [Bot], Majestic-12 [Bot], michaelten, springs and 49 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. KCNC C7 Brake Caliper

in Road

Doyler

3

563

Thu Jul 04, 2013 11:56 am

Doyler View the latest post

There are no new unread posts for this topic. Help me disassemble Bontrager XXX brake caliper

in Road

voodoojar

2

311

Tue Oct 01, 2013 11:35 pm

voodoojar View the latest post

There are no new unread posts for this topic. ultegra shifter with duraace brake caliper

in Road

project3

1

469

Wed Jul 10, 2013 5:07 pm

FIJIGabe View the latest post

There are no new unread posts for this topic. shimano 6700 --- > 6800 caliper! upgrade?

in Road

project3

5

1310

Tue Oct 08, 2013 1:04 am

project3 View the latest post

There are no new unread posts for this topic. Help deciphering stack and reach for frames?

in Road

SolidSnake03

11

668

Wed Oct 09, 2013 4:40 pm

WMW View the latest post


It is currently Sun Apr 20, 2014 1:44 am

All times are UTC + 1 hour




Advertising   –  FAQ   –  Contact   –  Convert   –  About

© Weight Weenies 2000-2013
hosted by starbike.com


How to get rid of these ads? Just register!


Powered by phpBB