Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About
It is currently Thu May 05, 2016 8:01 am
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED

If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062


All times are UTC+01:00





Post new topic  Reply to topic  [ 17 posts ]  Go to page 1 2 Next
Author Message
 Post subject: c40 tyre clearance
PostPosted: Fri Jul 06, 2012 10:08 pm 
Offline

Joined: Fri Feb 18, 2011 8:33 am
Posts: 132
Am I doing something stupid? It seems as if my Colnago C40 does not have enough clearance to run 25mm tyres?
After having sliced two Michelin tyres in a fortnight I got Continental Gatorskins in 25mm in the hope that they would last longer, and it seems I stuffed up :oops:


Top
   
 Post subject: Re: c40 tyre clearance
PostPosted: Fri Jul 06, 2012 11:21 pm 
Offline
User avatar

Joined: Sat Jun 19, 2010 8:21 pm
Posts: 444
Location: Zürich, Switzerland
What Michelin version ?

Pro Race 2 25mm fit more like 28s, I was able to fit a set of those on a C40 but had to re dish the rear wheel.

_________________
Hucken The Fard Up !
Colnagos : C50 ST01 - Master 30th AD10 - C40 Mapei WC


Top
   
 Post subject: Re: c40 tyre clearance
PostPosted: Fri Jul 06, 2012 11:31 pm 
Offline

Joined: Fri Feb 18, 2011 8:33 am
Posts: 132
Sorry if I was unclear - I had Michelin 23mm and they fit fine, but my 55km per day commute didn't play well with them. The roads aren't the best around here...

Pardon my stupidity but what does "redish" the wheels mean?

PS - I deflated the tyre to about 6bar and it seems to fit now. I am however still reluctant to ride like that...as there is VERY little clearance


Top
   
 Post subject: c40 tyre clearance
PostPosted: Sat Jul 07, 2012 12:59 am 
Offline
User avatar

Joined: Sat Jun 19, 2010 8:21 pm
Posts: 444
Location: Zürich, Switzerland
Re dish, is to alter the wheel centering in the seat stays or fork for a better tyre fit.

Sometimes a slim tyre would not touch the seat stays even when the wheel is not properly centred ( or dished ) , for larger tyres you would need to centre it better

_________________
Hucken The Fard Up !
Colnagos : C50 ST01 - Master 30th AD10 - C40 Mapei WC


Top
   
 Post subject: Re: c40 tyre clearance
PostPosted: Sat Jul 07, 2012 4:57 am 
Offline

Joined: Fri Feb 18, 2011 8:33 am
Posts: 132
Ahh, makes sense. Funny thing is the tyre seems to touch on the brake bridge i.e. it is almost as if the circumference of the tyre is > stays...


Top
   
 Post subject: Re: c40 tyre clearance
PostPosted: Sat Jul 07, 2012 7:22 am 
Offline

Joined: Tue Dec 23, 2008 2:57 pm
Posts: 806
Location: NYC
Redishing your wheel in order to make a wider tire fit is a poor, and more importantly, nonsensical idea that should NOT be followed . If you have to redish your wheel to get a wider tire to fit your frame that means your wheel was out of dish to begin with. Tire clearance issues are linked to vertical clearance (under your fork crown or under your brake caliper) and rarely liked to horizontal clearance. EM3

_________________
______________

My 2013 Cervelo R5


Top
   
 Post subject: Re: c40 tyre clearance
PostPosted: Sat Jul 07, 2012 7:53 am 
Offline

Joined: Fri Feb 18, 2011 8:33 am
Posts: 132
Correct, as stated above the tyre rub above, the wheels are factory built Campy wheels, no re dihing required.
Pressure down to 7 and the clear now (only just!)

I just found it strange that the 25mm tyres would not fit?

I have the tyres now, may need to get a new frame to fit :noidea:


Top
   
 Post subject: Re: c40 tyre clearance
PostPosted: Sat Jul 07, 2012 9:05 am 
Offline
User avatar

Joined: Thu Oct 23, 2008 11:38 pm
Posts: 262
Location: England, occiasionally Flanders.
No need for a new frame. Ebay the 25mm Contis and spend the money on a pair of Vittoria Pave 24mm's. I run them on my C50.

Paul.

_________________
If the grand tours are like classical music, kermesse racing is punkrock, Belgian style.
Colnago C50, Campag SR11


Top
   
 Post subject: Re: c40 tyre clearance
PostPosted: Sat Jul 07, 2012 3:29 pm 
Offline
User avatar

Joined: Thu Apr 08, 2004 3:31 pm
Posts: 879
Location: Hollywood
i ran 700x25 michelin carbons, no issues.

_________________
The Chronic


Top
   
 Post subject: Re: c40 tyre clearance
PostPosted: Sat Jul 07, 2012 6:34 pm 
Offline

Joined: Wed Jun 27, 2012 12:22 am
Posts: 37
Putting 25mm Conti GP4000S tires on my bike is the single best improvement I have made for performance/comfort. I am a big fan of 25mm tires in general.

If I understand correctly, the clearance through the stays/fork isn't the issue, but vertical clearance to the caliper arms. I had a similar issue and just switched out for new brakes that had more clearance.


Top
   
 Post subject: Re: c40 tyre clearance
PostPosted: Sat Jul 07, 2012 11:40 pm 
Offline

Joined: Tue May 12, 2009 10:03 am
Posts: 395
Bontie...What you should do is buy some decent alu tubs like ambrosio nemesis and put some veloflex paves on them. That'll really give you a comfortable ride, is puncture resistant and will suit the stature of a Colnago C40.
Do the right thing here....


Top
   
 Post subject: Re: c40 tyre clearance
PostPosted: Sun Jul 08, 2012 12:05 am 
Offline

Joined: Fri Feb 18, 2011 8:33 am
Posts: 132
juanacity wrote:
Putting 25mm Conti GP4000S tires on my bike is the single best improvement I have made for performance/comfort. I am a big fan of 25mm tires in general.

If I understand correctly, the clearance through the stays/fork isn't the issue, but vertical clearance to the caliper arms. I had a similar issue and just switched out for new brakes that had more clearance.


No the clearance to the fork bridge is too tight (as if the stays are too short) - it is a size 54. It clears the calipers by miles.
Mind you the one tyre is slightly worn, and that seems fine. SO maybe I should just wear the other one down.


Top
   
 Post subject: Re: c40 tyre clearance
PostPosted: Sun Jul 08, 2012 12:08 am 
Offline

Joined: Fri Feb 18, 2011 8:33 am
Posts: 132
andyindo wrote:
Bontie...What you should do is buy some decent alu tubs like ambrosio nemesis and put some veloflex paves on them. That'll really give you a comfortable ride, is puncture resistant and will suit the stature of a Colnago C40.
Do the right thing here....


Yes, tubbies would be the perfect solution. The roads around Heathrow would definitely play nice with tubbies at £55+ a pop. Let alone gluing tyres next to the road in the dark days during winter... I think I'll just get a new frame. :roll:


Top
   
 Post subject: Re: c40 tyre clearance
PostPosted: Sun Jul 08, 2012 7:10 am 
Offline

Joined: Tue Feb 14, 2006 4:42 am
Posts: 934
Location: Calgary
I'd play around with tires a bit more before replacing the frame. I've tried a dozen or more other frames since my first C40 in 1995 and keep coming back the the C40. I even found a couple of NOS ones last year. It would be hard to duplicate the C40 mired with a new bike, although you can duplicate the handling with a new, stiff Colnago.

Rather than worry about tire size, I'd worry about durability. I've had good luck with Michelins lately but not always in the past. If the Gatorskins are working, why not just go to 23? It sounds as though you can wear out the 25 on the back.


Top
   
 Post subject: Re: c40 tyre clearance
PostPosted: Sun Jul 08, 2012 10:01 am 
Offline

Joined: Fri Feb 18, 2011 8:33 am
Posts: 132
Thanks C50jim, I am going to give it a go with the Gatorskins - at 6 bar front it is not touching, so I will see how that goes.
As for a new frame, everyone needs an excuse to get another bike, not true :)

I know what you mean that you keep coming back to the C40...


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 17 posts ]  Go to page 1 2 Next

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Campag Bora clinchers on a Colnago C60 - tyre size/clearance

in Road

DrJeffers

12

683

Fri Jan 29, 2016 6:07 pm

sharkman View the latest post

There are no new unread posts for this topic. Colnago C60 tire clearance

in Road

Faapaa

6

679

Wed Oct 21, 2015 3:40 pm

Faapaa View the latest post

There are no new unread posts for this topic. Minimum Tire to Chainstay Clearance

in Road

fogman

6

1015

Fri Jun 05, 2015 7:51 pm

Valbrona View the latest post

There are no new unread posts for this topic. Canyon Ultimate AL tire clearance

in Road

Roel W

0

381

Mon Aug 10, 2015 8:54 pm

Roel W View the latest post

There are no new unread posts for this topic. PF30 adaptors: clearance for Di2 internal wires?

[ Go to page: 1 2 ]

in Road

alanmclean

15

593

Wed Sep 30, 2015 8:44 pm

alanmclean View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: Alexa [Bot], stormur and 14 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited