I'm getting a Sram Force BB30 crankset for my caad 10 5. I have two questions.

1 Will the stock FSA bottom bracket be compatible with this crank?

2. If they are compatible but I feel like changing the bottom bracket, or if they are't compatible what bottom bracket would you recommend for me?

Thanks in advance.

a BB30 bottom bracket should work with any BB30 crank, so you are good there.

if you wanted to replace it, the SRAM BB30 bearings are a fine replacement, but if the bearings aren't making any noises, there is no need to replace it (unless you want to replace it with something super fancy).

So I might need something like this?

http://www.competitivecyclist.com/produ ... 733.0.html

Yes that would be the correct kit. You don't need to change them but if you do I would strongly suggest you use some pressfit retaining compound to install the bearings. This will help eliminate any future creaking from the bearings.

Something like loctite green 609 or 640. I used 640.

You will also need some tools to remove the old bearings and install the new ones. This is a cheap tool that works well to fit the new ones http://www.ebay.com/itm/BB30-Bottom-Bra ... 3a6b332771. To remove the old bearings this is good http://www.ebay.com/itm/cannondale-bb30 ... 3cc36519b6


Also when I changed my bearings I used the Phil Wood BB30 bearings as they are very good steel bearings that will last a long time. Part is PW806 BB30 replacement (sold as a single bearing). http://philwood.com/store/page45.html