What dimension circlip pliers for Ultra Torque?
Moderator: robbosmans
- bikerjulio
- Posts: 1900
- Joined: Fri Dec 11, 2009 10:38 pm
- Location: Welland, Ontario
I just held one end and pushed on the other with a small screwdriver to get the removal started.
Or you could buy a circlip tool.
There's a youtube vid for the process. http://www.youtube.com/watch?v=EJ7VlQkCT9M
you need the correct puller and installation tool.
Video shows replacing the seal, but since I didn't get seals, I've left the old ones in place
Or you could buy a circlip tool.
There's a youtube vid for the process. http://www.youtube.com/watch?v=EJ7VlQkCT9M
you need the correct puller and installation tool.
Video shows replacing the seal, but since I didn't get seals, I've left the old ones in place
There's sometimes a buggy.
How many drivers does a buggy have?
One.
So let's just say I'm drivin' this buggy...
and if you fix your attitude you can ride along with me.
http://www.youtube.com/watch?v=GekiIMh4ZkM
How many drivers does a buggy have?
One.
So let's just say I'm drivin' this buggy...
and if you fix your attitude you can ride along with me.
http://www.youtube.com/watch?v=GekiIMh4ZkM
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
-
- Posts: 742
- Joined: Mon Jan 02, 2006 7:10 pm
Yep. Small screwdriver for me too.
Only thing to take note of is the direction of the seal, which I seem to recall getting upside down !
Only thing to take note of is the direction of the seal, which I seem to recall getting upside down !