HOT: Active* forum members generally gain 5% discount at starbike.com store!
Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Articles FAQ Contact About




Post new topic Reply to topic  [ 2 posts ] 
Author Message
PostPosted: Sat Jun 23, 2012 4:22 am 
Offline

Joined: Mon Feb 05, 2007 5:39 am
Posts: 651
Location: Winnipeg Canada
Whats the verdict on running an SRM on the EVO frameset??
I have a 2010 SRM, and have read varying stories from rubbing to the way that apparently works which I understand is SRM PF30 bearings, removal of seals, SRM axle, and use the old BB30 SRM dustshield... Ive contacted SRM but they don't reply....
I have also read that there was a new SRM issued for the Cannondale which is for the PF30 bearing...
Can anyone confirm any of this?

Thanks


Top
 Profile  
 
Posted: Sat Jun 23, 2012 4:22 am 


Top
  
 
PostPosted: Sat Jun 23, 2012 9:32 am 
Offline

Joined: Sun Jun 17, 2012 6:17 am
Posts: 4
I'm about to find out soon :wink:

Assuming you're talking about a hollowgram SRM, there is a tech doc from SRM that suggests on top of requiring the SRM specific axel, you either need to replace the non drive side SRAM PF30 dust shield with a Cannondale BB30 dust shield as you already mentioned or replacing the SRAM PF30 bottom bracket with a Cannondale bottom bracket

Quote:
SRM-PowerMeter Cannondale SI Installation Cannondale SuperSix Evo Frame
Information about the 2012 Cannondale SuperSix Evo frame and fitment regarding the current Cannondale SRM PowerMeter (and older version)
Below is the proper installation process for correct fitment.
Both old and new PowerMeter will fit on EVO frames, but one of the following two steps need to be done:
1. Replace the dust shield on the non-drive side of the SRAM PF30 BB with the standard Cannnondale dust shield. The Cannondale dust shield is thinner and this will shift the entire crank over to the drive side by about 2 mm. Use the special SRM spindle that is available from Cannondale as QC850.
2. Take out the SRAM PF30 BB and replace with Cannondale KP197/SRM. This is a set of BB cups with bearings that have a lip on the drive side that is only 1 mm thick (with a 0.5 mm chamfer - drawing below) as opposed to the SRAM cup that has a 1.5mm lip. This should also be used with the SRM spindle and the advantage of this option is that the whole crank is not shifted quite so far over to the drive side.


I'm probably 3 or 4 weeks away from picking up my Evo, but I'll let you know how I go when I do


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 


Who is online

Users browsing this forum: Alexa [Bot], Bing [Bot], cage, Google Adsense [Bot], JS300, Slagter, ToffieBoi and 74 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Focus Izalco Extreme 2010 - ISP extension?

in Road

LiKuid

7

257

Tue Apr 08, 2014 8:53 pm

LiKuid View the latest post

There are no new unread posts for this topic. Swap freehub on 2010 reynolds assaults from 11 campy 2 shima

in Road

Bantamben

1

383

Mon Jun 03, 2013 10:14 am

Bantamben View the latest post

There are no new unread posts for this topic. Cannondale Dilemma

in Road

rheosibal

14

1408

Tue Jan 21, 2014 3:35 am

shimmeD View the latest post

There are no new unread posts for this topic. Cannondale CAAD11 soon?

[ Go to page: 1, 2, 3 ]

in Road

tranzformer

40

4515

Fri Sep 27, 2013 12:05 am

r_mutt View the latest post

There are no new unread posts for this topic. Cannondale Headset?

in Road

Bianchi10

11

635

Thu Jan 30, 2014 9:26 am

TheDarkInstall View the latest post


It is currently Sat Apr 19, 2014 9:42 pm

All times are UTC + 1 hour




Advertising   –  FAQ   –  Contact   –  Convert   –  About

© Weight Weenies 2000-2013
hosted by starbike.com


How to get rid of these ads? Just register!


Powered by phpBB