Dura Ace vs Ultegra rear hub measurements

Discuss light weight issues concerning road bikes & parts.
Post Reply
HillRPete
Posts: 2292
Joined: Tue Apr 12, 2011 8:08 am
Location: Pedal Square

by HillRPete

Are the DA7900 rear hub measurements the same as the Ultegra 6700? My spoke calculator only knows about the DA. Thanks.

dwb
Posts: 35
Joined: Wed Feb 15, 2012 7:11 am

by dwb

Dura ace hubs are significantly different from Ultegra and other levels. 6700 should be the same as 6600.


"http://www.shimano.com/publish/content/global_cycle/en/us/index/tech_support/tech_tips.download.-Par50rparsys-0034-downloadFile.html/07)%20Hub%20Specs.pdf"

by Weenie


racingcondor
Posts: 194
Joined: Fri Aug 27, 2010 4:22 pm

by racingcondor

I built my training wheels up with a 6700 rear hub and came up with these measurements -

Centre to NDS Flange - 34mm
Centre to DS Flange - 17mm

Spoke hole circle - 47mm (outer to outer, centre to centre would be 45mm)
Spoke hole diameter - 2.3mm

Weight - 354g

Hope that helps.

Alex

EDIT - Interesting that it's different. I'm wondering if I measured in a different way to Shimano as I measured centre to the near side of the flange. If you add the 3mm for flange width you get a similar result to the Shimano tech doc for 6600.

HillRPete
Posts: 2292
Joined: Tue Apr 12, 2011 8:08 am
Location: Pedal Square

by HillRPete

Ok thanks everyone. I found another place that had the FH-6700 same as the 6600 from the tech docs, so I went with that. Fingers crossed ...

Post Reply
  • Similar Topics
    Replies
    Views
    Last post