Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About Impressum
It is currently Fri Sep 30, 2016 12:56 pm
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED
- Avatars cannot be uploaded ✔ FIXED

Please note that we will soon do some changes in WW board template design in case to get a fully mobile/desktop responsiveness board!
If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062


All times are UTC+01:00





Post new topic  Reply to topic  [ 4 posts ] 
Author Message
PostPosted: Wed Jun 13, 2012 1:14 pm 
Offline

Joined: Tue Apr 12, 2011 8:08 am
Posts: 2291
Location: Pedal Square
Are the DA7900 rear hub measurements the same as the Ultegra 6700? My spoke calculator only knows about the DA. Thanks.

_________________
Bikes: Raw Ti, 650b flatbar CX


Top
   
Posted: Wed Jun 13, 2012 1:14 pm 


Top
   
 
PostPosted: Wed Jun 13, 2012 5:14 pm 
Offline

Joined: Wed Feb 15, 2012 7:11 am
Posts: 35
Dura ace hubs are significantly different from Ultegra and other levels. 6700 should be the same as 6600.


"http://www.shimano.com/publish/content/global_cycle/en/us/index/tech_support/tech_tips.download.-Par50rparsys-0034-downloadFile.html/07)%20Hub%20Specs.pdf"


Top
   
PostPosted: Thu Jun 14, 2012 12:47 pm 
Offline

Joined: Fri Aug 27, 2010 4:22 pm
Posts: 150
I built my training wheels up with a 6700 rear hub and came up with these measurements -

Centre to NDS Flange - 34mm
Centre to DS Flange - 17mm

Spoke hole circle - 47mm (outer to outer, centre to centre would be 45mm)
Spoke hole diameter - 2.3mm

Weight - 354g

Hope that helps.

Alex

EDIT - Interesting that it's different. I'm wondering if I measured in a different way to Shimano as I measured centre to the near side of the flange. If you add the 3mm for flange width you get a similar result to the Shimano tech doc for 6600.


Top
   
PostPosted: Tue Jun 19, 2012 5:20 pm 
Offline

Joined: Tue Apr 12, 2011 8:08 am
Posts: 2291
Location: Pedal Square
Ok thanks everyone. I found another place that had the FH-6700 same as the 6600 from the tech docs, so I went with that. Fingers crossed ...

_________________
Bikes: Raw Ti, 650b flatbar CX


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 4 posts ] 

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Dura Ace and Ultegra rear Mech interchangeablity

in Road

weastman

1

257

Tue May 24, 2016 11:57 am

junchen View the latest post

There are no new unread posts for this topic. Dura ace Hub - Ultegra freehub?

in Road

damond

6

629

Tue Sep 20, 2016 2:31 pm

damond View the latest post

There are no new unread posts for this topic. Ultegra vs Dura Ace brakes (6800 - 9000)

[ Go to page: 1 2 ]

in Road

iliedanila

28

4512

Sat Sep 17, 2016 1:26 am

5DII View the latest post

There are no new unread posts for this topic. Dura Ace 9070 DI2 shifters with Ultegra 6870 derailleur

[ Go to page: 1 2 ]

in Road

muntos

21

1367

Thu Feb 18, 2016 7:32 am

eaglejackson View the latest post

There are no new unread posts for this topic. Ultegra 6870 di2 Rear Shifting Problem

[ Go to page: 1 2 ]

in Road

hlvd

16

755

Mon Aug 29, 2016 6:34 pm

goodboyr View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: 4ibanez, Bing [Bot], MSNbot Media, Yahoo [Bot] and 34 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited